START-INFO-DIR-ENTRY * AutoGen: (autogen). The Automated Program Generator END-INFO-DIR-ENTRY This file documents Version 5.5 AutoGen copyright (C) 1992-2003 Bruce Korb AutoOpts copyright (C) 1992-2003 Bruce Korb snprintfv copyright (C) 1999-2000 Gary V. Vaughan AutoGen is free software. You may redistribute it and/or modify it under the terms of the GNU General Public License, as published by the Free Software Foundation; either version 2, or (at your option) any later version. AutoGen is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with AutoGen. See the file "COPYING". If not, write to: The Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. The Automated Program Generator ******************************* This file documents AutoGen version 5.5. It is a tool designed for generating program files that contain repetitive text with varied substitutions. This document is very long because it is intended as a reference document. For a quick start example, *Note Example Usage::. For a simple example of Automated Option processing, *Note Quick Start::. For a full list of the Automated Option features, *Note Features::. This edition documents version 5.5, May 2003. Introduction ************ AutoGen is a tool designed for generating program files that contain repetitive text with varied substitutions. Its goal is to simplify the maintenance of programs that contain large amounts of repetitious text. This is especially valuable if there are several blocks of such text that must be kept synchronized in parallel tables. One common example is the problem of maintaining the code required for processing program options. Processing options requires a minimum of four different constructs be kept in proper order in different places in your program. You need at least: 1. The flag character in the flag string, 2. code to process the flag when it is encountered, 3. a global state variable or two, and 4. a line in the usage text. You will need more things besides this if you choose to implement long option names, rc/ini file processing, environment variables and so on. All of this can be done mechanically; with the proper templates and this program. In fact, it has already been done and AutoGen itself uses it *Note AutoOpts::. For a simple example of Automated Option processing, *Note Quick Start::. For a full list of the Automated Option features, *Note Features::. The Purpose of AutoGen ====================== The idea of this program is to have a text file, a template if you will, that contains the general text of the desired output file. That file includes substitution expressions and sections of text that are replicated under the control of separate definition files. AutoGen was designed with the following features: 1. The definitions are completely separate from the template. By completely isolating the definitions from the template it greatly increases the flexibility of the template implementation. A secondary goal is that a template user only needs to specify those data that are necessary to describe his application of a template. 2. Each datum in the definitions is named. Thus, the definitions can be rearranged, augmented and become obsolete without it being necessary to go back and clean up older definition files. Reduce incompatibilities! 3. Every definition name defines an array of values, even when there is only one entry. These arrays of values are used to control the replication of sections of the template. 4. There are named collections of definitions. They form a nested hierarchy. Associated values are collected and associated with a group name. These associated data are used collectively in sets of substitutions. 5. The template has special markers to indicate where substitutions are required, much like the `${VAR}' construct in a shell `here doc'. These markers are not fixed strings. They are specified at the start of each template. Template designers know best what fits into their syntax and can avoid marker conflicts. We did this because it is burdensome and difficult to avoid conflicts using either M4 tokenizaion or C preprocessor substitution rules. It also makes it easier to specify expressions that transform the value. Of course, our expressions are less cryptic than the shell methods. 6. These same markers are used, in conjunction with enclosed keywords, to indicate sections of text that are to be skipped and for sections of text that are to be repeated. This is a major improvement over using C preprocessing macros. With the C preprocessor, you have no way of selecting output text because it is an unvarying, mechanical substitution process. 7. Finally, we supply methods for carefully controlling the output. Sometimes, it is just simply easier and clearer to compute some text or a value in one context when its application needs to be later. So, functions are available for saving text or values for later use. A Simple Example ================ This is just one simple example that shows a few basic features. If you are interested, you also may run "make check" with the `VERBOSE' enviornment variable set and see a number of other examples in the `agen5/test/testdir' directory. Assume you have an enumeration of names and you wish to associate some string with each name. Assume also, for the sake of this example, that it is either too complex or too large to maintain easily by hand. We will start by writing an abbreviated version of what the result is supposed to be. We will use that to construct our output templates. In a header file, `list.h', you define the enumeration and the global array containing the associated strings: typedef enum { IDX_ALPHA, IDX_BETA, IDX_OMEGA } list_enum; extern const char* az_name_list[ 3 ]; Then you also have `list.c' that defines the actual strings: #include "list.h" const char* az_name_list[] = { "some alpha stuff", "more beta stuff", "final omega stuff" }; First, we will define the information that is unique for each enumeration name/string pair. This would be placed in a file named, `list.def', for example. autogen definitions list; list = { list_element = alpha; list_info = "some alpha stuff"; }; list = { list_info = "more beta stuff"; list_element = beta; }; list = { list_element = omega; list_info = "final omega stuff"; }; The `autogen definitions list;' entry defines the file as an AutoGen definition file that uses a template named `list'. That is followed by three `list' entries that define the associations between the enumeration names and the strings. The order of the differently named elements inside of list is unimportant. They are reversed inside of the `beta' entry and the output is unaffected. Now, to actually create the output, we need a template or two that can be expanded into the files you want. In this program, we use a single template that is capable of multiple output files. The definitions above refer to a `list' template, so it would normally be named, `list.tpl'. It looks something like this. (For a full description, *Note Template File::.) [+ AutoGen5 template h c +] [+ CASE (suffix) +][+ == h +] typedef enum {[+ FOR list "," +] IDX_[+ (string-upcase! (get "list_element")) +][+ ENDFOR list +] } list_enum; extern const char* az_name_list[ [+ (count "list") +] ]; [+ == c +] #include "list.h" const char* az_name_list[] = {[+ FOR list "," +] "[+list_info+]"[+ ENDFOR list +] };[+ ESAC +] The `[+ AutoGen5 template h c +]' text tells AutoGen that this is an AutoGen version 5 template file; that it is to be processed twice; that the start macro marker is `[+'; and the end marker is `+]'. The template will be processed first with a suffix value of `h' and then with `c'. Normally, the suffix values are appended to the `base-name' to create the output file name. The `[+ == h +]' and `[+ == c +]' `CASE' selection clauses select different text for the two different passes. In this example, the output is nearly disjoint and could have been put in two separate templates. However, sometimes there are common sections and this is just an example. The `[+FOR list "," +]' and `[+ ENDFOR list +]' clauses delimit a block of text that will be repeated for every definition of `list'. Inside of that block, the definition name-value pairs that are members of each `list' are available for substitutions. The remainder of the macros are expressions. Some of these contain special expression functions that are dependent on AutoGen named values; others are simply Scheme expressions, the result of which will be inserted into the output text. Other expressions are names of AutoGen values. These values will be inserted into the output text. For example, `[+list_info+]' will result in the value associated with the name `list_info' being inserted between the double quotes and `(string-upcase! (get "list_element"))' will first "get" the value associated with the name `list_element', then change the case of all the letters to upper case. The result will be inserted into the output document. If you have compiled AutoGen, you can copy out the template and definitions as described above and run `autogen list.def'. This will produce exactly the hypothesized desired output. One more point, too. Lets say you decided it was too much trouble to figure out how to use AutoGen, so you created this enumeration and string list with thousands of entries. Now, requirements have changed and it has become necessary to map a string containing the enumeration name into the enumeration number. With AutoGen, you just alter the template to emit the table of names. It will be guaranteed to be in the correct order, missing none of the entries. If you want to do that by hand, well, good luck. csh/zsh caveat ============== AutoGen tries to use your normal shell so that you can supply shell code in a manner you are accustomed to using. If, however, you use csh or zsh, you cannot do this. Csh is sufficiently difficult to program that it is unsupported. Zsh, though largely programmable, also has some anomolies that make it incompatible with AutoGen usage. Therefore, when invoking AutoGen from these environments, you must be certain to set the SHELL environment variable to a Bourne-derived shell. e.g., sh, ksh or bash. Any shell you choose for your own scripts need to follow these basic requirements: 1. It handles `trap $sig ":"' without output to standard out. This is done when the server shell is first started. If your shell does not handle this, then it may be able to by loading functions from its start up files. 2. At the beginning of each scriptlet, the command `\\cd $PWD' is inserted. This ensures that `cd' is not aliased to something peculiar and each scriptlet starts life in the execution directory. 3. At the end of each scriptlet, the command `echo mumble' is appended. The program you use as a shell must emit the single argument `mumble' on a line by itself. A User's Perspective ==================== Alexandre wrote: > > I'd appreciate opinions from others about advantages/disadvantages of > each of these macro packages. I am using AutoGen in my pet project, and find one of its best points to be that it separates the operational data from the implementation. Indulge me for a few paragraphs, and all will be revealed: In the manual, Bruce cites the example of maintaining command line flags inside the source code; traditionally spreading usage information, flag names, letters and processing across several functions (if not files). Investing the time in writing a sort of boiler plate (a template in AutoGen terminology) pays by moving all of the option details (usage, flags names etc.) into a well structured table (a definition file if you will), so that adding a new command line option becomes a simple matter of adding a set of details to the table. So far so good! Of course, now that there is a template, writing all of that tedious optargs processing and usage functions is no longer an issue. Creating a table of the options needed for the new project and running AutoGen generates all of the option processing code in C automatically from just the tabular data. AutoGen in fact already ships with such a template... AutoOpts. One final consequence of the good separation in the design of AutoGen is that it is retargetable to a greater extent. The egcs/gcc/fixinc/inclhack.def can equally be used (with different templates) to create a shell script (inclhack.sh) or a c program (fixincl.c). This is just the tip of the iceberg. AutoGen is far more powerful than these examples might indicate, and has many other varied uses. I am certain Bruce or I could supply you with many and varied examples, and I would heartily recommend that you try it for your project and see for yourself how it compares to m4. As an aside, I would be interested to see whether someone might be persuaded to rationalise autoconf with AutoGen in place of m4... Ben, are you listening? autoconf-3.0! `kay? =)O| Sincerely, Gary V. Vaughan AutoGen Definitions File ************************ This chapter describes the syntax and semantics of the AutoGen definition file. In order to instantiate a template, you normally must provide a definitions file that identifies itself and contains some value definitions. Consequently, we keep it very simple. For "advanced" users, there are preprocessing directives, sparse arrays, named indexes and comments that may be used as well. The definitions file is used to associate values with names. Every value is implicitly an array of values, even if there is only one value. Values may be either simple strings or compound collections of name-value pairs. An array may not contain both simple and compound members. Fundamentally, it is as simple as: prog_name = "autogen"; flag = { name = templ_dirs; value = L; descrip = "Template search directory list"; }; For purposes of commenting and controlling the processing of the definitions, C-style comments and most C preprocessing directives are honored. The major exception is that the `#if' directive is ignored, along with all following text through the matching `#endif' directive. The C preprocessor is not actually invoked, so C macro substitution is *not* performed. The Identification Definition ============================= The first definition in this file is used to identify it as a AutoGen file. It consists of the two keywords, `autogen' and `definitions' followed by the default template name and a terminating semi-colon (`;'). That is: AutoGen Definitions TEMPLATE-NAME; Note that, other than the name TEMPLATE-NAME, the words `AutoGen' and `Definitions' are searched for without case sensitivity. Most lookups in this program are case insensitive. Also, if the input contains more identification definitions, they will be ignored. This is done so that you may include (*note Directives::) other definition files without an identification conflict. AutoGen uses the name of the template to find the corresponding template file. It searches for the file in the following way, stopping when it finds the file: 1. It tries to open `./TEMPLATE-NAME'. If it fails, 2. it tries `./TEMPLATE-NAME.tpl'. 3. It searches for either of these files in the directories listed in the templ-dirs command line option. If AutoGen fails to find the template file in one of these places, it prints an error message and exits. Named Definitions ================= Any name may have multiple values associated with it in the definition file. If there is more than one instance, the *only* way to expand all of the copies of it is by using the FOR (*note FOR::) text function on it, as described in the next chapter. There are two kinds of definitions, `simple' and `compound'. They are defined thus (*note Full Syntax::): compound_name '=' '{' definition-list '}' ';' simple_name '=' string ';' no_text_name ';' `No_text_name' is a simple definition with a shorthand empty string value. The string values for definitions may be specified in any of several formation rules. Definition List --------------- `definition-list' is a list of definitions that may or may not contain nested compound definitions. Any such definitions may *only* be expanded within a `FOR' block iterating over the containing compound definition. *Note FOR::. Here is, again, the example definitions from the previous chapter, with three additional name value pairs. Two with an empty value assigned (FIRST and LAST), and a "global" GROUP_NAME. autogen definitions list; group_name = example; list = { list_element = alpha; first; list_info = "some alpha stuff"; }; list = { list_info = "more beta stuff"; list_element = beta; }; list = { list_element = omega; last; list_info = "final omega stuff"; }; Double Quote String ------------------- The string follows the C-style escaping (`\', `\n', `\f', `\v', etc.), plus octal character numbers specified as `\ooo'. The difference from "C" is that the string may span multiple lines. Like ANSI "C", a series of these strings, possibly intermixed with single quote strings, will be concatenated together. Single Quote String ------------------- This is similar to the shell single-quote string. However, escapes `\' are honored before another escape, single quotes `'' and hash characters `#'. This latter is done specifically to disambiguate lines starting with a hash character inside of a quoted string. In other words, fumble = ' #endif '; could be misinterpreted by the definitions scanner, whereas this would not: fumble = ' \#endif '; As with the double quote string, a series of these, even intermixed with double quote strings, will be concatenated together. Shell Output String ------------------- This is assembled according to the same rules as the double quote string, except that there is no concatenation of strings and the resulting string is written to a shell server process. The definition takes on the value of the output string. NB The text is interpreted by a server shell. There may be left over state from previous ``' processing and it may leave state for subsequent processing. However, a `cd' to the original directory is always issued before the new command is issued. An Unquoted String ------------------ A simple string that does not contain white space may be left unquoted. The string must not contain any of the characters special to the definition text (i.e. `"', `#', `'', `(', `)', `,', `;', `<', `=', `>', `[', `]', ``', `{', or `}'). This list is subject to change, but it will never contain underscore (`_'), period (`.'), slash (`/'), colon (`:'), hyphen (`-') or backslash (`\\'). Basically, if the string looks like it is a normal DOS or UNIX file or variable name, and it is not one of two keywords (`autogen' or `definitions') then it is OK to not quote it, otherwise you should. Scheme Result String -------------------- A scheme result string must begin with an open parenthesis `('. The scheme expression will be evaluated by Guile and the value will be the result. The AutoGen expression functions are *dis*abled at this stage, so do not use them. A Here String ------------- A `here string' is formed in much the same way as a shell here doc. It is denoted with a doubled less than character and, optionally, a hyphen. This is followed by optional horizontal white space and an ending marker-identifier. This marker must follow the syntax rules for identifiers. Unlike the shell version, however, you must not quote this marker. The resulting string will start with the first character on the next line and continue up to but not including the newline that precedes the line that begins with the marker token. No backslash or any other kind of processing is done on this string. The characters are copied directly into the result string. Here are two examples: str1 = <<- STR_END $quotes = " ' ` STR_END; str2 = << STR_END $quotes = " ' ` STR_END; STR_END; The first string contains no new line characters. The first character is the dollar sign, the last the back quote. The second string contains one new line character. The first character is the tab character preceeding the dollar sign. The last character is the semicolon after the `STR_END'. That `STR_END' does not end the string because it is not at the beginning of the line. In the preceeding case, the leading tab was stripped. Concatenated Strings -------------------- If single or double quote characters are used, then you also have the option, a la ANSI-C syntax, of implicitly concatenating a series of them together, with intervening white space ignored. NB You *cannot* use directives to alter the string content. That is, str = "fumble" #ifdef LATER "stumble" #endif ; will result in a syntax error. The preprocessing directives are not carried out by the C preprocessor. However, str = '"fumble\n" #ifdef LATER " stumble\n" #endif '; *Will* work. It will enclose the `#ifdef LATER' and `#endif' in the string. But it may also wreak havoc with the definition processing directives. The hash characters in the first column should be disambiguated with an escape `\' or join them with previous lines: `"fumble\n#ifdef LATER...'. Assigning an Index to a Definition ================================== In AutoGen, every name is implicitly an array of values. When assigning values, they are usually implicitly assiged to the next highest slot. They can also be specified explicitly: mumble[9] = stumble; mumble[0] = grumble; If, subsequently, you assign a value to `mumble' without an index, its index will be `10', not `1'. If indexes are specified, they must not cause conflicts. `#define'-d names may also be used for index values. This is equivalent to the above: #define FIRST 0 #define LAST 9 mumble[LAST] = stumble; mumble[FIRST] = grumble; All values in a range do *not* have to be filled in. If you leave gaps, then you will have a sparse array. This is fine (*note FOR::). You have your choice of iterating over all the defined values, or iterating over a range of slots. This: [+ FOR mumble +][+ ENDFOR +] iterates over all and only the defined entries, whereas this: [+ FOR mumble (for-by 1) +][+ ENDFOR +] will iterate over all 10 "slots". Your template will likely have to contain something like this: [+ IF (exist? (sprintf "mumble[%d]" (for-index))) +] or else "mumble" will have to be a compound value that, say, always contains a "grumble" value: [+ IF (exist? "grumble") +] Dynamic Text ============ There are several methods for including dynamic content inside a definitions file. Three of them are mentioned above (*Note shell-generated:: and *note scheme-generated::) in the discussion of string formation rules. Another method uses the `#shell' processing directive. It will be discussed in the next section (*note Directives::). Guile/Scheme may also be used to yield to create definitions. When the Scheme expression is preceeded by a backslash and single quote, then the expression is expected to be an alist of names and values that will be used to create AutoGen definitions. This method can be be used as follows: \'( (name (value-expression)) (name2 (another-expr)) ) This is entirely equivalent to: name = (value-expression); name2 = (another-expr); Under the covers, the expression gets handed off to a Guile function named `alist->autogen-def' in an expression that looks like this: (alist->autogen-def ( (name (value-expression)) (name2 (another-expr)) ) ) Controlling What Gets Processed =============================== Definition processing directives can *only* be processed if the '#' character is the first character on a line. Also, if you want a '#' as the first character of a line in one of your string assignments, you should either escape it by preceding it with a backslash `\', or by embedding it in the string as in `"\n#"'. All of the normal C preprocessing directives are recognized, though several are ignored. There is also an additional `#shell' - `#endshell' pair. Another minor difference is that AutoGen directives must have the hash character (`#') in column 1. The final tweak is that `#!' is treated as a comment line. Using this feature, you can use: `#! /usr/local/bin/autogen' as the first line of a definitons file, set the mode to executable and "run" the definitions file as if it were a direct invocation of AutoGen. This was done for its hack value. The ignored directives are: `#assert', `#ident', `#pragma', and `#if'. Note that when ignoring the `#if' directive, all intervening text through its matching `#endif' is also ignored, including the `#else' clause. The AutoGen directives that affect the processing of definitions are: `#define name [ ]' Will add the name to the define list as if it were a DEFINE program argument. Its value will be the first non-whitespace token following the name. Quotes are *not* processed. After the definitions file has been processed, any remaining entries in the define list will be added to the environment. `#elif' This must follow an `#if' otherwise it will generate an error. It will be ignored. `#else' This must follow an `#if', `#ifdef' or `#ifndef'. If it follows the `#if', then it will be ignored. Otherwise, it will change the processing state to the reverse of what it was. `#endif' This must follow an `#if', `#ifdef' or `#ifndef'. In all cases, this will resume normal processing of text. `#endshell' Ends the text processed by a command shell into autogen definitions. `#error [ ]' This directive will cause AutoGen to stop processing and exit with a status of EXIT_FAILURE. `#if [ ]' `#if' expressions are not analyzed. *Everything* from here to the matching `#endif' is skipped. `#ifdef name-to-test' The definitions that follow, up to the matching `#endif' will be processed only if there is a corresponding `-Dname' command line option. `#ifndef name-to-test' The definitions that follow, up to the matching `#endif' will be processed only if there is *not* a corresponding `-Dname' command line option or there was a canceling `-Uname' option. `#include unadorned-file-name' This directive will insert definitions from another file into the current collection. If the file name is adorned with double quotes or angle brackets (as in a C program), then the include is ignored. `#line' Alters the current line number and/or file name. You may wish to use this directive if you extract definition source from other files. `getdefs' uses this mechanism so AutoGen will report the correct file and approximate line number of any errors found in extracted definitions. `#option opt-name [ ]' This directive will pass the option name and associated text to the AutoOpts optionLoadLine routine (*note optionLoadLine::). The option text may span multiple lines by continuing them with a backslash. The backslash/newline pair will be replaced with two space characters. This directive may be used to set a search path for locating template files For example, this: #option templ-dirs $ENVVAR/dirname will direct autogen to use the `ENVVAR' environment variable to find a directory named `dirname' that (may) contain templates. Since these directories are searched in most recently supplied first order, search directories supplied in this way will be searched before any supplied on the command line. `#shell' Invokes `$SHELL' or `/bin/sh' on a script that should generate AutoGen definitions. It does this using the same server process that handles the back-quoted ``' text. *CAUTION* let not your `$SHELL' be `csh'. `#undef name-to-undefine' Will remove any entries from the define list that match the undef name pattern. Pre-defined Names ================= When AutoGen starts, it tries to determine several names from the operating environment and put them into environment variables for use in both `#ifdef' tests in the definitions files and in shell scripts with environment variable tests. `__autogen__' is always defined. For other names, AutoGen will first try to use the POSIX version of the `sysinfo(2)' system call. Failing that, it will try for the POSIX `uname(2)' call. If neither is available, then only "`__autogen__'" will be inserted into the environment. In all cases, the associated names are converted to lower case, surrounded by doubled underscores and non-symbol characters are replaced with underscores. With Solaris on a sparc platform, `sysinfo(2)' is available. The following strings are used: * `SI_SYSNAME' (e.g., "__sunos__") * `SI_HOSTNAME' (e.g., "__ellen__") * `SI_ARCHITECTURE' (e.g., "__sparc__") * `SI_HW_PROVIDER' (e.g., "__sun_microsystems__") * `SI_PLATFORM' (e.g., "__sun_ultra_5_10__") * `SI_MACHINE' (e.g., "__sun4u__") For Linux and other operating systems that only support the `uname(2)' call, AutoGen will use these values: * `sysname' (e.g., "__linux__") * `machine' (e.g., "__i586__") * `nodename' (e.g., "__bach__") By testing these pre-defines in my definitions, you can select pieces of the definitions without resorting to writing shell scripts that parse the output of `uname(1)'. You can also segregate real C code from autogen definitions by testing for "`__autogen__'". #ifdef __bach__ location = home; #else location = work; #endif Commenting Your Definitions =========================== The definitions file may contain C and C++ style comments. /* * This is a comment. It continues for several lines and closes * when the characters '*' and '/' appear together. */ // this comment is a single line comment What it all looks like. ======================= This is an extended example: autogen definitions `template-name'; /* * This is a comment that describes what these * definitions are all about. */ global = "value for a global text definition."; /* * Include a standard set of definitions */ #include standards.def a_block = { a_field; a_subblock = { sub_name = first; sub_field = "sub value."; }; #ifdef FEATURE a_subblock = { sub_name = second; }; #endif }; YACC Language Grammar ===================== The preprocessing directives and comments are not part of the grammar. They are handled by the scanner/lexer. The following was extracted directly from the defParse.y source file: definitions : identity def_list TK_END { $$ = (YYSTYPE)(rootDefCtx.pDefs = (tDefEntry*)$2); } | identity TK_END { $$ = makeEmptyDefs(); } ; def_list : definition { $$ = $1; } | definition def_list { $$ = addSibMacro( $1, $2 ); } | identity def_list { $$ = $2; } ; identity : TK_AUTOGEN TK_DEFINITIONS filename ';' { $$ = identify( $3 ); } ; definition : value_name ';' { $$ = makeMacro( $1, (YYSTYPE)"", VALTYP_TEXT ); } | value_name '=' text_list ';' { $$ = makeMacroList( $1, $3, VALTYP_TEXT ); } | value_name '=' block_list ';' { $$ = makeMacroList( $1, $3, VALTYP_BLOCK ); } ; text_list : anystring { $$ = startList( $1 ); } | anystring ',' text_list { $$ = appendList( $1, $3 ); } ; block_list : def_block { $$ = startList( $1 ); } | def_block ',' block_list { $$ = appendList( $1, $3 ); } ; def_block : '{' def_list '}' { $$ = $2; } ; anystring : filename { $$ = $1; } | TK_NUMBER { $$ = $1; } ; filename : TK_OTHER_NAME { $$ = $1; } | TK_STRING { $$ = $1; } | TK_VAR_NAME { $$ = $1; } ; value_name : TK_VAR_NAME { $$ = findPlace( (YYSTYPE)$1, (YYSTYPE)NULL ); } | TK_VAR_NAME '[' TK_NUMBER ']' { $$ = findPlace( (YYSTYPE)$1, (YYSTYPE)$3 ); } | TK_VAR_NAME '[' TK_VAR_NAME ']' { $$ = findPlace( (YYSTYPE)$1, (YYSTYPE)$3 ); } ; Alternate Definition Forms ========================== There are several methods for supplying data values for templates. `no definitions' It is entirely possible to write a template that does not depend upon external definitions. Such a template would likely have an unvarying output, but be convenient nonetheless because of an external library of either AutoGen or Scheme functions, or both. This can be accommodated by providing the `--override-tpl' and `--no-definitions' options on the command line. *Note autogen Invocation::. `CGI' AutoGen behaves as a CGI server if the definitions input is from stdin and the environment variable `REQUEST_METHOD' is defined and set to either "GET" or "POST", *Note AutoGen CGI::. Obviously, all the values are constrained to strings because there is no way to represent nested values. `XML' AutoGen comes with a program named, `xml2ag'. Its output can either be redirected to a file for later use, or the program can be used as an AutoGen wrapper. *Note xml2ag Invocation::. The introductory template example (*note Example Usage::) can be rewritten in XML as follows: A more XML-normal form might look like this: some alpha stuff more beta stuff final omega stuff but you would have to change the template `list_info' references into `text' references. `standard AutoGen definitions' Of course. :-) AutoGen Template **************** The AutoGen template file defines the content of the output text. It is composed of two parts. The first part consists of a pseudo macro invocation and commentary. It is followed by the template proper. This pseudo macro is special. It is used to identify the file as a AutoGen template file, fixing the starting and ending marks for the macro invocations in the rest of the file, specifying the list of suffixes to be generated by the template and, optionally, the shell to use for processing shell commands embedded in the template. AutoGen-ing a file consists of copying text from the template to the output file until a start macro marker is found. The text from the start marker to the end marker constitutes the macro text. AutoGen macros may cause sections of the template to be skipped or processed several times. The process continues until the end of the template is reached. The process is repeated once for each suffix specified in the pseudo macro. This chapter describes the format of the AutoGen template macros and the usage of the AutoGen native macros. Users may augment these by defining their own macros. *Note DEFINE::. Format of the Pseudo Macro ========================== The pseudo macro is used to tell AutoGen how to process a template. It tells autogen: 1. The punctuation characters used to demarcate the start of a macro. It may be up to seven characters long and must be the first non-whitespace characters in the file. 2. That start marker must be immediately followed by the marker strings "AutoGen5" and then "template", though capitalization is not important. The next several components may be intermingled: 3. Zero, one or more suffix specifications tell AutoGen how many times to process the template file. No suffix specifications mean that it is to be processed once and that the generated text is to be written to stdout. The current suffix for each pass can be determined with the `(suffix)' scheme function (*note SCM suffix::). The suffix specification consists of a sequence of POSIX compliant file name characters and, optionally, an equal sign and a file name "printf"-style formatting string. Two string arguments are allowed for that string: the base name of the definition file and the current suffix (that being the text to the left of the equal sign). (Note: "POSIX compliant file name characters" consist of alphanumerics plus the period (`.'), hyphen (`-') and underscore (`_') characters.) 4. Comment lines: blank lines, lines starting with a hash mark [`#']), and edit mode comments (text between pairs of `-*-' strings). 5. Scheme expressions may be inserted in order to make configuration changes before template processing begins. It is used, for example, to allow the template writer to specify the shell program that must be used to interpret the shell commands in the template. It can have no effect on any shell commands in the definitions file, as that file will have been processed by the time the pseudo macro is interpreted. (setenv "SHELL" "/bin/sh") This is extremely useful to ensure that the shell used is the one the template was written to use. By default, AutoGen determines the shell to use by user preferences. Sometimes, that can be the "csh", though. The scheme expression can also be used to save a pre-existing output file for later text extraction (*note SCM extract::). (shellf "mv -f %1$s.c %1$s.sav" (base-name)) 6. Finally, the end-macro marker must be last. It must not begin with a POSIX file name character, and if it begins with an equal sign, then it must be separated from any suffix specification by white space. It is generally a good idea to use some sort of opening bracket in the starting macro and closing bracket in the ending macro (e.g. `{', `(', `[', or even `<' in the starting macro). It helps both visually and with editors capable of finding a balancing parenthesis. The closing marker may *not* begin with an open parenthesis, as that is used to enclose a scheme expression. It is also helpful to avoid using the comment marker (`#'); the POSIXly acceptable file name characters period (`.'), hyphen (`-') and underscore (`_'); and finally, it is advisable to avoid using any of the quote characters double, single or back-quote. But there is no special check for any of these advisories. As an example, assume we want to use `[+' and `+]' as the start and end macro markers, and we wish to produce a `.c' and a `.h' file, then the first macro invocation will look something like this: [+ AutoGen5 template -*- Mode: emacs-mode-of-choice -*- h=chk-%s.h c # make sure we don't use csh: (setenv "SHELL" "/bin/sh") +] The template proper starts after the pseudo-macro. The starting character is either the first non-whitespace character or the first character after the newline that follows the end macro marker. Naming a value ============== When an AutoGen value is specified in a template, it is specified by name. The name may be a simple name, or a compound name of several components. Since each named value in AutoGen is implicitly an array of one or more values, each component may have an index associated with it. It looks like this: comp-name-1 . comp-name-2 [ 2 ] Note that if there are multiple components to a name, each component name is separated by a dot (`.'). Indexes follow a component name, enclosed in square brackets (`[' and `]'). The index may be either an integer or an integer-valued define name. The first component of the name is searched for in the current definition level. If not found, higher levels will be searched until either a value is found, or there are no more definition levels. Subsequent components of the name must be found within the context of the newly-current definition level. Also, if the named value is prefixed by a dot (`.'), then the value search is started in the current context only. No higher levels are searched. If someone rewrites this, I'll incorporate it. :-) Macro Expression Syntax ======================= AutoGen has two types of expressions: full expressions and basic ones. A full AutoGen expression can appear by itself, or as the argument to certain AutoGen built-in macros: CASE, IF, ELIF, INCLUDE, INVOKE (explicit invocation, *note INVOKE::), and WHILE. If it appears by itself, the result is inserted into the output. If it is an argument to one of these macros, the macro code will act on it sensibly. You are constrained to basic expressions only when passing arguments to user defined macros, *Note DEFINE::. The syntax of a full AutoGen expression is: [[ ] ] [ [ ]] How the expression is evaluated depends upon the presence or absence of the apply code and value name. The "value name" is the name of an AutoGen defined value, or not. If it does not name such a value, the expression result is generally the empty string. All expressions must contain either a `value-name' or a `basic-expr'. Apply Code ---------- The "apply code" selected determines the method of evaluating the expression. There are five apply codes, including the non-use of an apply code. `no apply code' This is the most common expression type. Expressions of this sort come in three flavors: `' The result is the value of `value-name', if defined. Otherwise it is the empty string. `' The result of the basic expression is the result of the full expression, *Note basic expression::. ` ' If there is a defined value for `value-name', then the `basic-expr' is evaluated. Otherwise, the result is the empty string. `% ' If `value-name' is defined, use `basic-expr' as a format string for sprintf. Then, if the `basic-expr' is either a back-quoted string or a parenthesized expression, then hand the result to the appropriate interpreter for further evaluation. Otherwise, for single and double quote strings, the result is the result of the sprintf operation. Naturally, if `value-name' is not defined, the result is the empty string. For example, assume that `fumble' had the string value, `stumble': [+ % fumble `printf '%%x\\n' $%s` +] This would cause the shell to evaluate "`printf '%x\n' $stumble'". Assuming that the shell variable `stumble' had a numeric value, the expression result would be that number, in hex. Note the need for doubled percent characters and backslashes. `? ' Two `basic-expr'-s are required. If the `value-name' is defined, then the first `basic-expr-1' is evaluated, otherwise `basic-expr-2' is. `- ' Evaluate `basic-expr' only if `value-name' is not defined. `?% ' This combines the functions of `?' and `%'. If `value-name' is defined, it behaves exactly like `%', above, using `basic-expr-1'. If not defined, then `basic-expr-2' is evaluated. For example, assume again that `fumble' had the string value, `stumble': [+ ?% fumble `cat $%s` `pwd` +] This would cause the shell to evaluate "`cat $stumble'". If `fumble' were not defined, then the result would be the name of our current directory. Basic Expression ---------------- A basic expression can have one of the following forms: `'STRING'' A single quoted string. Backslashes can be used to protect single quotes (`''), hash characters (`#'), or backslashes (`\') in the string. All other characters of STRING are output as-is when the single quoted string is evaluated. Backslashes are processed before the hash character for consistency with the definition syntax. It is needed there to avoid preprocessing conflicts. `"STRING"' A double quoted string. This is a cooked text string as in C, except that they are not concatenated with adjacent strings. Evaluating "`STRING'" will output STRING with all backslash sequences interpreted. ``STRING`' A back quoted string. When this expression is evaluated, STRING is first interpreted as a cooked string (as in `"STRING"') and evaluated as a shell expression by the AutoGen server shell. This expression is replaced by the stdout output of the shell. `(STRING)' A parenthesized expression. It will be passed to the Guile interpreter for evaluation and replaced by the resulting value. Additionally, other than in the `%' and `?%' expressions, the Guile expressions may be introduced with the Guile comment character (`;') and you may put a series of Guile expressions within a single macro. They will be implicitly evaluated as if they were arguments to the `(begin ...)' expression. The result will be the the result of the last Guile expression evaluated. AutoGen Scheme Functions ======================== AutoGen uses Guile to interpret Scheme expressions within AutoGen macros. All of the normal Guile functions are available, plus several extensions (*note Common Functions::) have been added to augment the repertoire of string manipulation functions and manage the state of AutoGen processing. This section describes those functions that are specific to AutoGen. Please take note that these AutoGen specific functions are not loaded and thus not made available until after the command line options have been processed and the AutoGen definitions have been loaded. They may, of course, be used in Scheme functions that get defined at those times, but they cannot be invoked. `ag-function?' - test for function ---------------------------------- Usage: (ag-function? ag-name) return SCM_BOOL_T if a specified name is a user-defined AutoGen macro, otherwise return SCM_BOOL_F. Arguments: ag-name - name of AutoGen macro `base-name' - base output name ------------------------------ Usage: (base-name) Returns a string containing the base name of the output file(s). Generally, this is also the base name of the definitions file. This Scheme function takes no arguments. `count' - definition count -------------------------- Usage: (count ag-name) Count the number of entries for a definition. The input argument must be a string containing the name of the AutoGen values to be counted. If there is no value associated with the name, the result is an SCM immediate integer value of zero. Arguments: ag-name - name of AutoGen value `def-file' - definitions file name ---------------------------------- Usage: (def-file) Get the name of the definitions file. Returns the name of the source file containing the AutoGen definitions. This Scheme function takes no arguments. `dne' - "Do Not Edit" warning ----------------------------- Usage: (dne prefix [ first_prefix ] [ optpfx ]) Generate a "DO NOT EDIT" or "EDIT WITH CARE" warning string. Which depends on whether or not the `--writable' command line option was set. The first argument is a per-line string prefix. The optional second argument is a prefix for the first-line and, in read-only mode, activates the editor hints. -*- buffer-read-only: t -*- vi: set ro: The warning string also includes information about the template used to construct the file and the definitions used in its instantiation. The optional third argument is used when the first argument is actually an invocation option and the prefix arguments get shifted. The first argument must be, specifically, "`-d'". That is used to signify that the date stamp should not be inserted into the output. Arguments: prefix - string for starting each output line first_prefix - Optional - for the first output line optpfx - Optional - shifted prefix `error' - display message and exit ---------------------------------- Usage: (error message) The argument is a string that printed out as part of an error message. The message is formed from the formatting string: DEFINITIONS ERROR in %s line %d for %s: %s\n The first three arguments to this format are provided by the routine and are: The name of the template file, the line within the template where the error was found, and the current output file name. After displaying the message, the current output file is removed and autogen exits with the EXIT_FAILURE error code. IF, however, the argument begins with the number 0 (zero), or the string is the empty string, then processing continues with the next suffix. Arguments: message - message to display before exiting `exist?' - test for value name ------------------------------ Usage: (exist? ag-name) return SCM_BOOL_T iff a specified name has an AutoGen value. The name may include indexes and/or member names. All but the last member name must be an aggregate definition. For example: (exist? "foo[3].bar.baz") will yield true if all of the following is true: There is a member value of either group or string type named `baz' for some group value `bar' that is a member of the `foo' group with index `3'. There may be multiple entries of `bar' within `foo', only one needs to contain a value for `baz'. Arguments: ag-name - name of AutoGen value `find-file' - locate a file in the search path ---------------------------------------------- Usage: (find-file file-name [ suffix ]) AutoGen has a search path that it uses to locate template and definition files. This function will search the same list for `file-name', both with and without the `.suffix', if provided. Arguments: file-name - name of file with text suffix - Optional - file suffix to try, too `first-for?' - detect first iteration ------------------------------------- Usage: (first-for? [ for_var ]) Returns SCM_BOOL_T if the named FOR loop (or, if not named, the current innermost loop) is on the first pass through the data. Outside of any FOR loop, it returns SCM_UNDEFINED. *Note FOR::. Arguments: for_var - Optional - which for loop `for-by' - set iteration step ----------------------------- Usage: (for-by by) This function records the "step by" information for an AutoGen FOR function. Outside of the FOR macro itself, this function will emit an error. *Note FOR::. Arguments: by - the iteration increment for the AutoGen FOR macro `for-from' - set initial index ------------------------------ Usage: (for-from from) This function records the initial index information for an AutoGen FOR function. Outside of the FOR macro itself, this function will emit an error. *Note FOR::. Arguments: from - the initial index for the AutoGen FOR macro `for-index' - get current loop index ------------------------------------ Usage: (for-index [ for_var ]) Returns the current index for the named FOR loop. If not named, then the index for the innermost loop. Outside of any FOR loop, it returns SCM_UNDEFINED. *Note FOR::. Arguments: for_var - Optional - which for loop `for-sep' - set loop separation string -------------------------------------- Usage: (for-sep separator) This function records the separation string that is to be inserted between each iteration of an AutoGen FOR function. This is often nothing more than a comma. Outside of the FOR macro itself, this function will emit an error. Arguments: separator - the text to insert between the output of each FOR iteration `for-to' - set ending index --------------------------- Usage: (for-to to) This function records the terminating value information for an AutoGen FOR function. Outside of the FOR macro itself, this function will emit an error. *Note FOR::. Arguments: to - the final index for the AutoGen FOR macro `get' - get named value ----------------------- Usage: (get ag-name [ alt-val ]) Get the first string value associated with the name. It will either return the associated string value (if the name resolves), the alternate value (if one is provided), or else the empty string. Arguments: ag-name - name of AutoGen value alt-val - Optional - value if not present `high-lim' - get highest value index ------------------------------------ Usage: (high-lim ag-name) Returns the highest index associated with an array of definitions. This is generally, but not necessarily, one less than the `count' value. (The indexes may be specified, rendering a non-zero based or sparse array of values.) This is very useful for specifying the size of a zero-based array of values where not all values are present. For example: tMyStruct myVals[ [+ (+ 1 (high-lim "my-val-list")) +] ]; Arguments: ag-name - name of AutoGen value `last-for?' - detect last iteration ----------------------------------- Usage: (last-for? [ for_var ]) Returns SCM_BOOL_T if the named FOR loop (or, if not named, the current innermost loop) is on the last pass through the data. Outside of any FOR loop, it returns SCM_UNDEFINED. *Note FOR::. Arguments: for_var - Optional - which for loop `len' - get count of values --------------------------- Usage: (len ag-name) If the named object is a group definition, then "len" is the same as "count". Otherwise, if it is one or more text definitions, then it is the sum of their string lengths. If it is a single text definition, then it is equivalent to `(string-length (get "ag-name"))'. Arguments: ag-name - name of AutoGen value `low-lim' - get lowest value index ---------------------------------- Usage: (low-lim ag-name) Returns the lowest index associated with an array of definitions. Arguments: ag-name - name of AutoGen value `match-value?' - test for matching value ---------------------------------------- Usage: (match-value? op ag-name test-str) This function answers the question, "Is there an AutoGen value named `ag-name' with a value that matches the pattern `test-str' using the match function `op'?" Return SCM_BOOL_T iff at least one occurrence of the specified name has such a value. The operator can be any function that takes two string arguments and yields a boolean. It is expected that you will use one of the string matching functions provided by AutoGen. The value name must follow the same rules as the `ag-name' argument for `exist?' (*note SCM exist?::). Arguments: op - boolean result operator ag-name - name of AutoGen value test-str - string to test against `out-delete' - delete current output file ----------------------------------------- Usage: (out-delete) Remove the current output file. Cease processing the template for the current suffix. It is an error if there are `push'-ed output files. Use the `(error "0")' scheme function instead. *Note output controls::. This Scheme function takes no arguments. `out-depth' - output file stack depth ------------------------------------- Usage: (out-depth) Returns the depth of the output file stack. *Note output controls::. This Scheme function takes no arguments. `out-move' - change name of output file --------------------------------------- Usage: (out-move new-name) Rename current output file. *Note output controls::. Please note: changing the name will not save a temporary file from being deleted. It may, however, be used on the root output file. Arguments: new-name - new name for the current output file `out-name' - current output file name ------------------------------------- Usage: (out-name) Returns the name of the current output file. If the current file is a temporary, unnamed file, then it will scan up the chain until a real output file name is found. *Note output controls::. This Scheme function takes no arguments. `out-pop' - close current output file ------------------------------------- Usage: (out-pop [ disp ]) If there has been a `push' on the output, then close that file and go back to the previously open file. It is an error if there has not been a `push'. *Note output controls::. If there is no argument, no further action is taken. Otherwise, the argument should be `#t' and the contents of the file are returned by the function. Arguments: disp - Optional - return contents of the file `out-push-add' - append output to file -------------------------------------- Usage: (out-push-add file-name) Identical to `push-new', except the contents are *not* purged, but appended to. *Note output controls::. Arguments: file-name - name of the file to append text to `out-push-new' - purge and create output file --------------------------------------------- Usage: (out-push-new [ file-name ]) Leave the current output file open, but purge and create a new file that will remain open until a `pop' `delete' or `switch' closes it. The file name is optional and, if omitted, the output will be sent to a temporary file that will be deleted when it is closed. *Note output controls::. Arguments: file-name - Optional - name of the file to create `out-resume' - resume current output file ----------------------------------------- Usage: (out-resume suspName) If there has been a suspended output, then make that output descriptor current again. That output must have been suspended with the same tag name given to this routine as its argument. Arguments: suspName - A name tag for reactivating `out-suspend' - suspend current output file ------------------------------------------- Usage: (out-suspend suspName) If there has been a `push' on the output, then set aside the output descriptor for later reactiviation with `(out-resume "xxx")'. The tag name need not reflect the name of the output file. In fact, the output file may be an anonymous temporary file. You may also change the tag every time you suspend output to a file, because the tag names are forgotten as soon as the file has been "resumed". Arguments: suspName - A name tag for reactivating `out-switch' - close and create new output ------------------------------------------ Usage: (out-switch file-name) Switch output files - close current file and make the current file pointer refer to the new file. This is equivalent to `out-pop' followed by `out-push-new', except that you may not pop the base level output file, but you may `switch' it. *Note output controls::. Arguments: file-name - name of the file to create `set-option' - Set a command line option ---------------------------------------- Usage: (set-option opt) The text argument must be an option name followed by any needed option argument. Returns SCM_UNDEFINED. Arguments: opt - AutoGen option name + its argument `set-writable' - Make the output file be writable ------------------------------------------------- Usage: (set-writable [ set? ]) This function will set the current output file to be writable (or not). This is only effective if neither the `--writable' nor `--not-writable' have been specified. This state is reset when the current suffix's output is complete. Arguments: set? - Optional - boolean arg, false to make output non-writable `stack' - make list of AutoGen values ------------------------------------- Usage: (stack ag-name) Create a scheme list of all the strings that are associated with a name. They must all be text values or we choke. Arguments: ag-name - AutoGen value name `suffix' - get the current suffix --------------------------------- Usage: (suffix) Returns the current active suffix (*note pseudo macro::). This Scheme function takes no arguments. `tpl-file' - get the template file name --------------------------------------- Usage: (tpl-file) Returns the name of the current template file. This Scheme function takes no arguments. `tpl-file-line' - get the template file and line number ------------------------------------------------------- Usage: (tpl-file-line [ msg-fmt ]) Returns the file and line number of the current template macro using either the default format, "from %s line %d", or else the format you supply. For example, if you want to insert a "C" language file-line directive, you would supply the format "# %2$d %1$s". Arguments: msg-fmt - Optional - formatting for line message `make-header-guard' - make self-inclusion guard ----------------------------------------------- Emit a `#ifndef'/`#define' sequence based upon the output file name and the provided prefix. It will also define a scheme variables named, `header-file' and `header-guard'. The `#define' name is composed as follows: 1. The first element is the string argument and a separating underscore. 2. That is followed by the name of the header file with illegal characters mapped to underscores. 3. The end of the name is always, "`_GUARD'". 4. Finally, the entire string is mapped to upper case. The final `#define' name is stored in an SCM symbol named `header-guard'. Consequently, the concluding `#endif' for the file should read something like: #endif /* [+ (. header-guard) +] */ The name of the header file (the current output file) is also stored in an SCM symbol, `header-file'. Therefore, if you are also generating a C file that uses the previously generated header file, you can put this into that generated file: #include "[+ (. header-file) +]" Obviously, if you are going to produce more than one header file from a particular template, you will need to be careful how these SCM symbols get handled. Arguments: prefix - first segment of `#define' name `autogen-version' - autogen version number ------------------------------------------ This is a symbol defining the current AutoGen version number string. It was first defined in AutoGen-5.2.14. It is currently "5.5.4". Common Scheme Functions ======================= This section describes a number of general purpose functions that make the kind of string processing that AutoGen does a little easier. Unlike the AutoGen specific functions (*note AutoGen Functions::), these functions are available for direct use during definition load time. `bsd' - BSD Public License -------------------------- Usage: (bsd prog_name owner prefix) Emit a string that contains the Free BSD Public License. It takes three arguments: `prefix' contains the string to start each output line. `owner' contains the copyright owner. `prog_name' contains the name of the program the copyright is about. Arguments: prog_name - name of the program under the BSD owner - Grantor of the BSD License prefix - String for starting each output line `c-string' - emit string for ANSI C ----------------------------------- Usage: (c-string string) Reform a string so that, when printed, the C compiler will be able to compile the data and construct a string that contains exactly what the current string contains. Many non-printing characters are replaced with escape sequences. Newlines are replaced with a backslash, an `n', a closing quote, a newline, seven spaces and another re-opening quote. The compiler will implicitly concatenate them. The reader will see line breaks. A K&R compiler will choke. Use `kr-string' for that compiler. Arguments: string - string to reformat `error-source-line' - display of file & line -------------------------------------------- Usage: (error-source-line) This function is only invoked just before Guile displays an error message. It displays the file name and line number that triggered the evaluation error. You should not need to invoke this routine directly. Guile will do it automatically. This Scheme function takes no arguments. `extract' - extract text from another file ------------------------------------------ Usage: (extract file-name marker-fmt [ caveat ] [ default ]) This function is used to help construct output files that may contain text that is carried from one version of the output to the next. The first two arguments are required, the second are optional: * The `file-name' argument is used to name the file that contains the demarcated text. * The `marker-fmt' is a formatting string that is used to construct the starting and ending demarcation strings. The sprintf function is given the `marker-fmt' with two arguments. The first is either "START" or "END". The second is either "DO NOT CHANGE THIS COMMENT" or the optional `caveat' argument. * `caveat' is presumed to be absent if it is the empty string (`""'). If absent, "DO NOT CHANGE THIS COMMENT" is used as the second string argument to the `marker-fmt'. * When a `default' argument is supplied and no pre-existing text is found, then this text will be inserted between the START and END markers. The resulting strings are presumed to be unique within the subject file. As a simplified example: [+ (extract "fname" "// %s - SOMETHING - %s" "" "example default") +] will result in the following text being inserted into the output: // START - SOMETHING - DO NOT CHANGE THIS COMMENT example default // END - SOMETHING - DO NOT CHANGE THIS COMMENT The "`example default'" string can then be carried forward to the next generation of the output, *provided* the output is not named "`fname'" and the old output is renamed to "`fname'" before AutoGen-eration begins. *NOTE:* You can set aside previously generated source files inside the pseudo macro with a Guile/scheme function, extract the text you want to keep with this extract function. Just remember you should delete it at the end, too. Here is an example from my Finite State Machine generator: [+ AutoGen5 Template -*- Mode: text -*- h=%s-fsm.h c=%s-fsm.c (shellf "[ -f %1$s-fsm.h ] && mv -f %1$s-fsm.h .fsm.head [ -f %1$s-fsm.c ] && mv -f %1$s-fsm.c .fsm.code" (base-name)) +] This code will move the two previously produced output files to files named ".fsm.head" and ".fsm.code". At the end of the 'c' output processing, I delete them. Arguments: file-name - name of file with text marker-fmt - format for marker text caveat - Optional - warn about changing marker default - Optional - default initial text `format-arg-count' - count the args to a format ----------------------------------------------- Usage: (format-arg-count format) Sometimes, it is useful to simply be able to figure out how many arguments are required by a format string. For example, if you are extracting a format string for the purpose of generating a macro to invoke a printf-like function, you can run the formatting string through this function to determine how many arguments to provide for in the macro. e.g. for this extraction text: /*=fumble bumble * fmt: 'stumble %s: %d\n' =*/ You may wish to generate a macro: #define BUMBLE(a1,a2) printf_like(something,(a1),(a2)) You can do this by knowing that the format needs two arguments. Arguments: format - formatting string `fprintf' - format to a file ---------------------------- Usage: (fprintf port format [ format-arg ... ]) Format a string using arguments from the alist. Write to a specified port. The result will NOT appear in your output. Use this to print information messages to a template user. Arguments: port - Guile-scheme output port format - formatting string format-arg - Optional - list of arguments to formatting string `gperf' - perform a perfect hash function ----------------------------------------- Usage: (gperf name str) Perform the perfect hash on the input string. This is only useful if you have previously created a gperf program with the `make-gperf' function *Note SCM make-gperf::. The `name' you supply here must match the name used to create the program and the string to hash must be one of the strings supplied in the `make-gperf' string list. The result will be a perfect hash index. See the documentation for `gperf(1GNU)' for more details. Arguments: name - name of hash list str - string to hash `gpl' - GNU General Public License ---------------------------------- Usage: (gpl prog-name prefix) Emit a string that contains the GNU General Public License. It takes two arguments: `prefix' contains the string to start each output line, and `prog_name' contains the name of the program the copyright is about. Arguments: prog-name - name of the program under the GPL prefix - String for starting each output line `hide-email' - convert eaddr to javascript ------------------------------------------ Usage: (hide-email display eaddr) Hides an email address as a java scriptlett. The 'mailto:' tag and the email address are coded bytes rather than plain text. They are also broken up. Arguments: display - display text eaddr - email address `in?' - test for string in list ------------------------------- Usage: (in? test-string string-list ...) Return SCM_BOOL_T if the first argument string is found in one of the entries in the second (list-of-strings) argument. Arguments: test-string - string to look for string-list - list of strings to check `join' - join string list with separator ---------------------------------------- Usage: (join separator list ...) With the first argument as the separator string, joins together an a-list of strings into one long string. The list may contain nested lists, partly because you cannot always control that. Arguments: separator - string to insert between entries list - list of strings to join `kr-string' - emit string for K&R C ----------------------------------- Usage: (kr-string string) Reform a string so that, when printed, a K&R C compiler will be able to compile the data and construct a string that contains exactly what the current string contains. Many non-printing characters are replaced with escape sequences. New-lines are replaced with a backslash-n-backslash and newline sequence, Arguments: string - string to reformat `lgpl' - GNU Library General Public License ------------------------------------------- Usage: (lgpl prog_name owner prefix) Emit a string that contains the GNU Library General Public License. It takes three arguments: `prefix' contains the string to start each output line. `owner' contains the copyright owner. `prog_name' contains the name of the program the copyright is about. Arguments: prog_name - name of the program under the LGPL owner - Grantor of the LGPL prefix - String for starting each output line `license' - an arbitrary license -------------------------------- Usage: (license lic_name prog_name owner prefix) Emit a string that contains the named license. The license text is read from a file named, `lic_name'.lic, searching the standard directories. The file contents are used as a format argument to `printf'(3), with `prog_name' and `owner' as the two string formatting arguments. Each output line is automatically prefixed with the string `prefix'. Arguments: lic_name - file name of the license prog_name - name of the licensed program or library owner - Grantor of the License prefix - String for starting each output line `make-gperf' - build a perfect hash function program ---------------------------------------------------- Usage: (make-gperf name strings ...) Build a program to perform perfect hashes of a known list of input strings. This function produces no output, but prepares a program named, `gperf_' for use by the gperf function *Note SCM gperf::. This program will be obliterated within a few seconds after AutoGen exits. Arguments: name - name of hash list strings - list of strings to hash `makefile-script' - create makefile script ------------------------------------------ Usage: (makefile-script text) This function will take ordinary shell script text and reformat it so that it will work properly inside of a makefile shell script. Not every shell construct can be supported; the intent is to have most ordinary scripts work without much, if any, alteration. The following transformations are performed on the source text: 1. Trailing whitespace on each line is stripped. 2. Except for the last line, the string, " ; \\" is appended to the end of every line that does not end with a backslash, semi-colon, conjunction operator or pipe. Note that this will mutilate multi-line quoted strings, but `make' renders it impossible to use multi-line constructs anyway. 3. If the line ends with a backslash, it is left alone. 4. If the line ends with one of the excepted operators, then a space and backslash is added. 5. The dollar sign character is doubled, unless it immediately precedes an opening parenthesis or the single character make macros '*', '<', '@', '?' or '%'. Other single character make macros that do not have enclosing parentheses will fail. For shell usage of the "$@", "$?" and "$*" macros, you must enclose them with curly braces, e.g., "${?}". The ksh construct `$()' will not work. Though some `make's accept `${var}' constructs, this function will assume it is for shell interpretation and double the dollar character. You must use `$(var)' for all `make' substitutions. 6. Double dollar signs are replaced by four before the next character is examined. 7. Every line is prefixed with a tab, unless the first line already starts with a tab. 8. The newline character on the last line, if present, is suppressed. 9. Blank lines are stripped. This function is intended to be used approximately as follows: $(TARGET) : $(DEPENDENCIES) <+ (out-push-new) +> ....mostly arbitrary shell script text.... <+ (makefile-script (out-pop #t)) +> Arguments: text - the text of the script `max' - maximum value in list ----------------------------- Usage: (max list ...) Return the maximum value in the list Arguments: list - list of values. Strings are converted to numbers `min' - minimum value in list ----------------------------- Usage: (min list ...) Return the minimum value in the list Arguments: list - list of values. Strings are converted to numbers `prefix' - prefix lines with a string ------------------------------------- Usage: (prefix prefix text) Prefix every line in the second string with the first string. For example, if the first string is "# " and the second contains: two lines The result string will contain: # two # lines Arguments: prefix - string to insert at start of each line text - multi-line block of text `printf' - format to stdout --------------------------- Usage: (printf format [ format-arg ... ]) Format a string using arguments from the alist. Write to the standard out port. The result will NOT appear in your output. Use this to print information messages to a template user. Use "(sprintf ...)" to add text to your document. Arguments: format - formatting string format-arg - Optional - list of arguments to formatting string `raw-shell-str' - single quote shell string ------------------------------------------- Usage: (raw-shell-str string) Convert the text of the string into a singly quoted string that a normal shell will process into the original string. (It will not do macro expansion later, either.) Contained single quotes become tripled, with the middle quote escaped with a backslash. Normal shells will reconstitute the original string. *NOTE*: some shells will not correctly handle unusual non-printing characters. This routine works for most reasonably conventional ASCII strings. Arguments: string - string to transform `shell' - invoke a shell script ------------------------------- Usage: (shell command) Generate a string by writing the value to a server shell and reading the output back in. The template programmer is responsible for ensuring that it completes within 10 seconds. If it does not, the server will be killed, the output tossed and a new server started. Arguments: command - shell command - the result value is stdout `shell-str' - double quote shell string --------------------------------------- Usage: (shell-str string) Convert the text of the string into a double quoted string that a normal shell will process into the original string, almost. It will add the escape character `\\' before two special characters to accomplish this: the backslash `\\' and double quote `"'. *NOTE*: some shells will not correctly handle unusual non-printing characters. This routine works for most reasonably conventional ASCII strings. *WARNING*: This function omits the extra backslash in front of a backslash, however, if it is followed by either a backquote or a dollar sign. It must do this because otherwise it would be impossible to protect the dollar sign or backquote from shell evaluation. Consequently, it is not possible to render the strings "\\$" or "\\`". The lesser of two evils. All others characters are copied directly into the output. The `sub-shell-str' variation of this routine behaves identically, except that the extra backslash is omitted in front of `"' instead of ``'. You have to think about it. I'm open to suggestions. Meanwhile, the best way to document is with a detailed output example. If the backslashes make it through the text processing correctly, below you will see what happens with three example strings. The first example string contains a list of quoted `foo's, the second is the same with a single backslash before the quote characters and the last is with two backslash escapes. Below each is the result of the `raw-shell-str', `shell-str' and `sub-shell-str' functions. foo[0] 'foo' "foo" `foo` $foo raw-shell-str -> ''\''foo'\'' "foo" `foo` $foo' shell-str -> "'foo' \"foo\" `foo` $foo" sub-shell-str -> `'foo' "foo" \`foo\` $foo` foo[1] \'bar\' \"bar\" \`bar\` \$bar raw-shell-str -> '\'\''bar\'\'' \"bar\" \`bar\` \$bar' shell-str -> "\\'bar\\' \\\"bar\\\" \`bar\` \$bar" sub-shell-str -> `\\'bar\\' \"bar\" \\\`bar\\\` \$bar` foo[2] \\'BAZ\\' \\"BAZ\\" \\`BAZ\\` \\$BAZ raw-shell-str -> '\\'\''BAZ\\'\'' \\"BAZ\\" \\`BAZ\\` \\$BAZ' shell-str -> "\\\\'BAZ\\\\' \\\\\"BAZ\\\\\" \\\`BAZ\\\` \\\$BAZ" sub-shell-str -> `\\\\'BAZ\\\\' \\\"BAZ\\\" \\\\\`BAZ\\\\\` \\\$BAZ` There should be four, three, five and three backslashes for the four examples on the last line, respectively. The next to last line should have four, five, three and three backslashes. If this was not accurately reproduced, take a look at the agen5/test/shell.test test. Notice the backslashes in front of the dollar signs. It goes from zero to one to three for the "cooked" string examples. Arguments: string - string to transform `shellf' - format a string, run shell ------------------------------------- Usage: (shellf format [ format-arg ... ]) Format a string using arguments from the alist, then send the result to the shell for interpretation. Arguments: format - formatting string format-arg - Optional - list of arguments to formatting string `sprintf' - format a string --------------------------- Usage: (sprintf format [ format-arg ... ]) Format a string using arguments from the alist. Arguments: format - formatting string format-arg - Optional - list of arguments to formatting string `string-capitalize' - capitalize a new string --------------------------------------------- Usage: (string-capitalize str) Create a new SCM string containing the same text as the original, only all the first letter of each word is upper cased and all other letters are made lower case. Arguments: str - input string `string-capitalize!' - capitalize a string ------------------------------------------ Usage: (string-capitalize! str) capitalize all the words in an SCM string. Arguments: str - input/output string `string-contains-eqv?' - caseless substring ------------------------------------------- Usage: (*=* text match) string-contains-eqv?: Test to see if a string contains an equivalent string. `equivalent' means the strings match, but without regard to character case and certain characters are considered `equivalent'. Viz., '-', '_' and '^' are equivalent. Arguments: text - text to test for pattern match - pattern/substring to search for `string-contains?' - substring match ------------------------------------ Usage: (*==* text match) string-contains?: Test to see if a string contains a substring. "strstr(3)" will find an address. Arguments: text - text to test for pattern match - pattern/substring to search for `string-downcase' - lower case a new string ------------------------------------------- Usage: (string-downcase str) Create a new SCM string containing the same text as the original, only all the upper case letters are changed to lower case. Arguments: str - input string `string-downcase!' - make a string be lower case ------------------------------------------------ Usage: (string-downcase! str) Change to lower case all the characters in an SCM string. Arguments: str - input/output string `string-end-eqv-match?' - caseless regex ending ----------------------------------------------- Usage: (*~ text match) string-end-eqv-match?: Test to see if a string ends with a pattern. Case is not significant. Arguments: text - text to test for pattern match - pattern/substring to search for `string-end-match?' - regex match end ------------------------------------- Usage: (*~~ text match) string-end-match?: Test to see if a string ends with a pattern. Case is significant. Arguments: text - text to test for pattern match - pattern/substring to search for `string-ends-eqv?' - caseless string ending ------------------------------------------- Usage: (*= text match) string-ends-eqv?: Test to see if a string ends with an equivalent string. Arguments: text - text to test for pattern match - pattern/substring to search for `string-ends-with?' - string ending ----------------------------------- Usage: (*== text match) string-ends-with?: Test to see if a string ends with a substring. strcmp(3) returns zero for comparing the string ends. Arguments: text - text to test for pattern match - pattern/substring to search for `string-equals?' - string matching ---------------------------------- Usage: (== text match) string-equals?: Test to see if two strings exactly match. Arguments: text - text to test for pattern match - pattern/substring to search for `string-eqv-match?' - caseless regex match ------------------------------------------ Usage: (~ text match) string-eqv-match?: Test to see if a string fully matches a pattern. Case is not significant, but any character equivalences must be expressed in your regular expression. Arguments: text - text to test for pattern match - pattern/substring to search for `string-eqv?' - caseless string match ------------------------------------- Usage: (= text match) string-eqv?: Test to see if two strings are equivalent. `equivalent' means the strings match, but without regard to character case and certain characters are considered `equivalent'. Viz., '-', '_' and '^' are equivalent. If the arguments are not strings, then the result of the numeric comparison is returned. This is an overloaded operation. If the arguments are not both strings, then the query is passed through to `scm_num_eq_p()'. Arguments: text - text to test for pattern match - pattern/substring to search for `string-has-eqv-match?' - caseless regex contains ------------------------------------------------- Usage: (*~* text match) string-has-eqv-match?: Test to see if a string contains a pattern. Case is not significant. Arguments: text - text to test for pattern match - pattern/substring to search for `string-has-match?' - contained regex match ------------------------------------------- Usage: (*~~* text match) string-has-match?: Test to see if a string contains a pattern. Case is significant. Arguments: text - text to test for pattern match - pattern/substring to search for `string-match?' - regex match ----------------------------- Usage: (~~ text match) string-match?: Test to see if a string fully matches a pattern. Case is significant. Arguments: text - text to test for pattern match - pattern/substring to search for `string-start-eqv-match?' - caseless regex start ------------------------------------------------ Usage: (~* text match) string-start-eqv-match?: Test to see if a string starts with a pattern. Case is not significant. Arguments: text - text to test for pattern match - pattern/substring to search for `string-start-match?' - regex match start ----------------------------------------- Usage: (~~* text match) string-start-match?: Test to see if a string starts with a pattern. Case is significant. Arguments: text - text to test for pattern match - pattern/substring to search for `string-starts-eqv?' - caseless string start -------------------------------------------- Usage: (=* text match) string-starts-eqv?: Test to see if a string starts with an equivalent string. Arguments: text - text to test for pattern match - pattern/substring to search for `string-starts-with?' - string starting --------------------------------------- Usage: (==* text match) string-starts-with?: Test to see if a string starts with a substring. Arguments: text - text to test for pattern match - pattern/substring to search for `string-substitute' - multiple global replacements -------------------------------------------------- Usage: (string-substitute source match repl) `match' and `repl' may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this: (string-substitute source ("&" "<" ">") ("&" "<" ">")) Arguments: source - string to transform match - substring or substring list to be replaced repl - replacement strings or substrings `string->c-name!' - map non-name chars to underscore ---------------------------------------------------- Usage: (string->c-name! str) Change all the graphic characters that are invalid in a C name token into underscores. Whitespace characters are ignored. Any other character type (i.e. non-graphic and non-white) will cause a failure. Arguments: str - input/output string `string-tr' - convert characters with new result ------------------------------------------------ Usage: (string-tr source match translation) This is identical to `string-tr!', except that it does not over-write the previous value. Arguments: source - string to transform match - characters to be converted translation - conversion list `string-tr!' - convert characters --------------------------------- Usage: (string-tr! source match translation) This is the same as the `tr(1)' program, except the string to transform is the first argument. The second and third arguments are used to construct mapping arrays for the transformation of the first argument. It is too bad this little program has so many different and incompatible implementations! Arguments: source - string to transform match - characters to be converted translation - conversion list `string-upcase' - upper case a new string ----------------------------------------- Usage: (string-upcase str) Create a new SCM string containing the same text as the original, only all the lower case letters are changed to upper case. Arguments: str - input string `string-upcase!' - make a string be upper case ---------------------------------------------- Usage: (string-upcase! str) Change to upper case all the characters in an SCM string. Arguments: str - input/output string `sub-shell-str' - back quoted (sub-)shell string ------------------------------------------------ Usage: (sub-shell-str string) This function is substantially identical to `shell-str', except that the quoting character is ``' and the "leave the escape alone" character is `"'. Arguments: string - string to transform `sum' - sum of values in list ----------------------------- Usage: (sum list ...) Compute the sum of the list of expressions. Arguments: list - list of values. Strings are converted to numbers `html-escape-encode' - escape special chars ------------------------------------------- Usage: (html-escape-encode str) Substitute escape sequences for characters that are special to HTML/XML. It will replace "`&'", "`<'" and "`>'" with the strings, "`&'", "`<'", and "`>'", respectively. Arguments: str - string to transform AutoGen Native Macros ===================== This section describes the various AutoGen natively defined macros. Unlike the Scheme functions, some of these macros are "block macros" with a scope that extends through a terminating macro. Block macros must not overlap. That is to say, a block macro started within the scope of an encompassing block macro must have its matching end macro appear before the encompassing block macro is either ended or subdivided. The block macros are these: `CASE' This macro has scope through the `ESAC' macro. The scope is subdivided by `SELECT' macros. You must have at least one `SELECT' macro. `DEFINE' This macro has scope through the `ENDDEF' macro. The defined user macro can never be a block macro. `FOR' This macro has scope through the `ENDFOR' macro. `IF' This macro has scope through the `ENDIF' macro. The scope may be subdivided by `ELIF' and `ELSE' macros. Obviously, there may be only one `ELSE' macro and it must be the last of these subdivisions. `INCLUDE' This macro has the scope of the included file. It is a block macro in the sense that the included file must not contain any incomplete block macros. `WHILE' This macro has scope through the `ENDWHILE' macro. AutoGen Macro Syntax -------------------- The general syntax is: [ { | } ] [ ... ] The syntax for `' depends on the particular macro, but is generally a full expression (*note expression syntax::). Here are the exceptions to that general rule: 1. `INVOKE' macros, implicit or explicit, must be followed by a list of name/string value pairs. The string values are simple expressions, as described above. That is, the `INVOKE' syntax is either: [ [ = ] ... ] or INVOKE [ [ = ] ... ] 2. AutoGen FOR macros must be in one of two forms: FOR [ ] or FOR (...Scheme expression list) where `' must be a simple name and the Scheme expression list is expected to contain one or more of the `for-from', `for-to', `for-by', and `for-sep' functions. (*Note FOR::, and *Note AutoGen Functions::) 3. AutoGen `DEFINE' macros must be followed by a simple name. Anything after that is ignored. *Note DEFINE::. 4. The AutoGen `COMMENT', `ELSE', `ESAC' and the `END*' macros take no arguments and ignore everything after the macro name (e.g. see *Note COMMENT::) CASE - Select one of several template blocks -------------------------------------------- The arguments are evaluated and converted to a string, if necessary. (*note EXPR::) The scope of the macro is up to the matching ESAC function. Within the scope of a CASE, this string is matched against case selection macros. There are sixteen match macros that are derived from four different ways the test may be performed, plus an "always true" match. The code for each selection expression is formed as follows: 1. Must the match start matching from the beginning of the string? If not, then the match macro code starts with an asterisk (`*'). 2. Must the match finish matching at the end of the string? If not, then the match macro code ends with an asterisk (`*'). 3. Is the match a pattern match or a string comparison? If a comparison, use an equal sign (`='). If a pattern match, use a tilde (`~'). 4. Is the match case sensitive? If alphabetic case is important, double the tilde or equal sign. 5. Do you need a default match when none of the others match? Use a single asterisk (`*'). For example: [+ CASE +] [+ ~~* "[Tt]est" +]reg exp must match at start, not at end [+ == "TeSt" +]a full-string, case sensitive compare [+ = "TEST" +]a full-string, case insensitive compare [+ * +]always match - no testing [+ ESAC +] `' (*note expression syntax::) may be any expression, including the use of apply-codes and value-names. If the expression yields a number, it is converted to a decimal string. These case selection codes have also been implemented as Scheme expression functions using the same codes (*note Common Functions::). COMMENT - A block of comment to be ignored ------------------------------------------ This function can be specified by the user, but there will never be a situation where it will be invoked at emit time. The macro is actually removed from the internal representation. If the native macro name code is `#', then the entire macro function is treated as a comment and ignored. DEFINE - Define a user AutoGen macro ------------------------------------ This function will define a new macro. You must provide a name for the macro. You do not specify any arguments, though the invocation may specify a set of name/value pairs that are to be active during the processing of the macro. [+ define foo +] ... macro body with macro functions ... [+ enddef +] ... [+ foo bar='raw text' baz=<> +] Once the macro has been defined, this new macro can be invoked by specifying the macro name as the first token after the start macro marker. Alternatively, you may make the invocation explicitly invoke a defined macro by specifying `INVOKE' in the macro invocation. If you do that, the macro name can be computed with an expression that gets evaluated every time the INVOKE macro is encountered. *Note INVOKE::. Any remaining text in the macro invocation will be used to create new name/value pairs that only persist for the duration of the processing of the macro. The expressions are evaluated the same way basic expressions are evaluated. *Note expression syntax::. The resulting definitions are handled much like regular definitions, except: 1. The values may not be compound. That is, they may not contain nested name/value pairs. 2. The bindings go away when the macro is complete. 3. The name/value pairs are separated by whitespace instead of semi-colons. 4. Sequences of strings are not concatenated. ELIF - Alternate Conditional Template Block ------------------------------------------- This macro must only appear after an `IF' function, and before any associated `ELSE' or `ENDIF' functions. It denotes the start of an alternate template block for the `IF' function. Its expression argument is evaluated as are the arguments to `IF'. For a complete description *Note IF::. ELSE - Alternate Template Block ------------------------------- This macro must only appear after an `IF' function, and before the associated `ENDIF' function. It denotes the start of an alternate template block for the `IF' function. For a complete description *Note IF::. ENDDEF - Ends a macro definition. --------------------------------- This macro ends the `DEFINE' function template block. For a complete description *Note DEFINE::. ENDFOR - Terminates the `FOR' function template block ----------------------------------------------------- This macro ends the `FOR' function template block. For a complete description *Note FOR::. ENDIF - Terminate the `IF' Template Block ----------------------------------------- This macro ends the `IF' function template block. For a complete description *Note IF::. ENDWHILE - Terminate the `WHILE' Template Block ----------------------------------------------- This macro ends the `WHILE' function template block. For a complete description *Note WHILE::. ESAC - Terminate the `CASE' Template Block ------------------------------------------ This macro ends the `CASE' function template block. For a complete description, *Note CASE::. EXPR - Evaluate and emit an Expression -------------------------------------- This macro does not have a name to cause it to be invoked explicitly, though if a macro starts with one of the apply codes or one of the simple expression markers, then an expression macro is inferred. The result of the expression evaluation (*note expression syntax::) is written to the current output. FOR - Emit a template block multiple times ------------------------------------------ This macro has a slight variation on the standard syntax: FOR [ ] or FOR (...Scheme expression list or FOR IN "quoted string" unquoted-string ... Other than for the last form, the first macro argument must be the name of an AutoGen value. If there is no value associated with the name, the `FOR' template block is skipped entirely. The scope of the `FOR' macro extends to the corresponding `ENDFOR' macro. The last form will create an array of string values named `' that only exists within the context of this `FOR' loop. With this form, in order to use a `separator-string', you must code it into the end of the template block using the `(last-for?)' predicate function (*note SCM last-for?::). If there are any arguments after the `value-name', the initial characters are used to determine the form. If the first character is either a semi-colon (`;') or an opening parenthesis (`('), then it is presumed to be a Scheme expression containing the FOR macro specific functions `for-from', `for-by', `for-to', and/or `for-sep'. *Note AutoGen Functions::. If it consists of an '`i'' an '`n'' and separated by white space from more text, then the `FOR x IN' form is processed. Otherwise, the remaining text is presumed to be a string for inserting between each iteration of the loop. This string will be emitted one time less than the number of iterations of the loop. That is, it is emitted after each loop, excepting for the last iteration. If the from/by/to functions are invoked, they will specify which copies of the named value are to be processed. If there is no copy of the named value associated with a particular index, the `FOR' template block will be instantiated anyway. The template must use methods for detecting missing definitions and emitting default text. In this fashion, you can insert entries from a sparse or non-zero based array into a dense, zero based array. *NB:* the `for-from', `for-to', `for-by' and `for-sep' functions are disabled outside of the context of the `FOR' macro. Likewise, the `first-for', `last-for' and `for-index' functions are disabled outside of the range of a `FOR' block. [+FOR var (for-from 0) (for-to ) (for-sep ",") +] ... text with `var'ious substitutions ...[+ ENDFOR var+] this will repeat the `... text with `var'ious substitutions ...' +1 times. Each repetition, except for the last, will have a comma `,' after it. [+FOR var ",\n" +] ... text with `var'ious substitutions ...[+ ENDFOR var +] This will do the same thing, but only for the index values of `var' that have actually been defined. IF - Conditionally Emit a Template Block ---------------------------------------- Conditional block. Its arguments are evaluated (*note EXPR::) and if the result is non-zero or a string with one or more bytes, then the condition is true and the text from that point until a matched `ELIF', `ELSE' or `ENDIF' is emitted. `ELIF' introduces a conditional alternative if the `IF' clause evaluated FALSE and `ELSE' introduces an unconditional alternative. [+IF +] emit things that are for the true condition[+ ELIF +] emit things that are true maybe[+ ELSE "This may be a comment" +] emit this if all but else fails[+ ENDIF "This may *also* be a comment" +] `' may be any expression described in the `EXPR' expression function, including the use of apply-codes and value-names. If the expression yields an empty string, it is interpreted as false. INCLUDE - Read in and emit a template block ------------------------------------------- The entire contents of the named file is inserted at this point. The contents of the file are processed for macro expansion. The arguments are eval-ed, so you may compute the name of the file to be included. The included file must not contain any incomplete function blocks. Function blocks are template text beginning with any of the macro functions `CASE', `DEFINE', `FOR', `IF' and `WHILE'; extending through their respective terminating macro functions. INVOKE - Invoke a User Defined Macro ------------------------------------ User defined macros may be invoked explicitly or implicitly. If you invoke one implicitly, the macro must begin with the name of the defined macro. Consequently, this may *not* be a computed value. If you explicitly invoke a user defined macro, the macro begins with the macro name `INVOKE' followed by a basic expression that must yield a known user defined macro. A macro name _must_ be found, or AutoGen will issue a diagnostic and exit. Arguments are passed to the invoked macro by name. The text following the macro name must consist of a series of names each of which is followed by an equal sign (`=') and a basic expression that yields a string. The string values may contain template macros that are parsed the first time the macro is processed and evaluated again every time the macro is evaluated. SELECT - Selection block for CASE function ------------------------------------------ This macro selects a block of text by matching an expression against the sample text expression evaluated in the `CASE' macro. *Note CASE::. You do not specify a `SELECT' macro with the word "select". Instead, you must use one of the 17 match operators described in the `CASE' macro description. UNKNOWN - Either a user macro or a value name. ---------------------------------------------- The macro text has started with a name not known to AutoGen. If, at run time, it turns out to be the name of a defined macro, then that macro is invoked. If it is not, then it is a conditional expression that is evaluated only if the name is defined at the time the macro is invoked. You may not specify `UNKNOWN' explicitly. WHILE - Conditionally loop over a Template Block ------------------------------------------------ Conditionally repeated block. Its arguments are evaluated (*note EXPR::) and as long as the result is non-zero or a string with one or more bytes, then the condition is true and the text from that point until a matched `ENDWHILE' is emitted. [+WHILE +] emit things that are for the true condition[+ ENDWHILE +] `' may be any expression described in the `EXPR' expression function, including the use of apply-codes and value-names. If the expression yields an empty string, it is interpreted as false. Redirecting Output ================== AutoGen provides a means for redirecting the template output to different files. It is accomplished by providing a set of Scheme functions named `out-*' (*note AutoGen Functions::). `out-push (*note SCM out-push-new::)' This allows you to logically "push" output files onto a stack. `out-pop (*note SCM out-pop::)' This function closes the current output file and resumes output to the next one in the stack. `out-suspend (*note SCM out-suspend::)' This function does not close the current output, but instead sets it aside for resumption with `out-resume (*note SCM out-resume::)' This will put a named file descriptor back onto the top of stack so that it becomes the current output again. `out-switch (*note SCM out-switch::)' This closes the current output and creates a new file, purging any preexisting one. This is a shortcut for "pop" followed by "push", but can also be done at the base level. `out-move (*note SCM out-move::)' Renames the current output file without closing it. There are also several functions for determining the output status. *Note AutoGen Functions::. Augmenting AutoGen Features *************************** AutoGen was designed to be simple to enhance. You can do it by providing shell commands, Guile/Scheme macros or callout functions that can be invoked as a Guile macro. Here is how you do these. Shell Output Commands ===================== Shell commands are run inside of a server process. This means that, unlike `make', context is kept from one command to the next. Consequently, you can define a shell function in one place inside of your template and invoke it in another. You may also store values in shell variables for later reference. If you load functions from a file containing shell functions, they will remain until AutoGen exits. If your shell script should determine that AutoGen should stop processing, the recommended method for stopping AutoGen is: echo "some error text" >&2 kill -2 ${AG_pid} Guile Macros ============ Guile also maintains context from one command to the next. This means you may define functions and variables in one place and reference them elsewhere. You also may load Guile macro definitions from a Scheme file by using the `--load-scheme' command line option (*note autogen load-scheme::). Beware, however, that the AutoGen specific scheme functions have not been loaded at this time, so though you may define functions that reference them, do not invoke the AutoGen functions at this time. If your Scheme script should determine that AutoGen should stop processing, the recommended method for stopping AutoGen is: (error "some error text") Guile Callout Functions ======================= Callout functions must be registered with Guile to work. This can be accomplished either by putting your routines into a shared library that contains a `void scm_init( void )' routine that registers these routines, or by building them into AutoGen. To build them into AutoGen, you must place your routines in the source directory and name the files `exp*.c'. You also must have a stylized comment that `getdefs' can find that conforms to the following: /*=gfunc * * what: * general_use: * string: * exparg: , [, ['optional'] [, 'list']] * doc: A long description telling people how to use * this function. =*/ SCM ag_scm_( SCM arg_name[, ...] ) { } `gfunc' You must have this exactly thus. `' This must follow C syntax for variable names `' This should be about a half a line long. It is used as a subsection title in this document. `general_use:' You must supply this unless you are an AutoGen maintainer and are writing a function that queries or modifies the state of AutoGen. `' Normally, the `function-name' string will be transformed into a reasonable invocation name. However, that is not always true. If the result does not suit your needs, then supply an alternate string. `exparg:' You must supply one for each argument to your function. All optional arguments must be last. The last of the optional arguments may be a list, if you choose. `doc:' Please say something meaningful. `[, ...]' Do not actually specify an ANSI ellipsis here. You must provide for all the arguments you specified with `exparg'. See the Guile documentation for more details. More information is also available in a large comment at the beginning of the `agen5/snarf.tpl' template file. AutoGen Macros ============== There are two kinds those you define yourself and AutoGen native. The user-defined macros may be defined in your templates or loaded with the `--lib-template' option (See *Note DEFINE:: and *Note autogen lib-template::). As for AutoGen native macros, do not add any. It is easy to do, but I won't like it. The basic functions needed to accomplish looping over and selecting blocks of text have proven to be sufficient over a period of several years. New text transformations can be easily added via any of the AutoGen extension methods, as discussed above. Invoking autogen **************** AutoGen creates text files from templates using external definitions. The definitions file (`') can be specified with the `definitions' option or as the command argument, but not both. Omitting it or specifying `-' will result in reading definitions from standard input. The output file names are based on the template, but generally use the base name of the definition file. If standard in is read for the definitions, then `stdin' will be used for that base name. The suffixes to the base name are gotten from the template. However, the template file may specify the entire output file name. The generated files are always created in the current directory. If you need to place output in an alternate directory, `cd' to that directory and use the `-templ_dirs' option to search the original directory. `loop-limit' is used in debugging to stop runaway expansions. This chapter was generated by *AutoGen*, the aginfo template and the option descriptions for the *autogen* program. It documents the autogen usage text and option meanings. This software is released under the GNU General Public License. autogen usage help (-?) ======================= This is the automatically generated usage text for autogen: autogen - The Automated Program Generator - Ver. 5.5.4 USAGE: autogen [ - [] | --[{=| }] ]... [ ] Flg Arg Option-Name Description -L Str templ-dirs Template search directory list - may appear multiple times -T Str override-tpl Override template file - may not be preset -l Str lib-template Library template file - may appear multiple times -b Str base-name Base name for output file(s) - may not be preset Str definitions Definitions input file - disabled as --no-definitions - enabled by default - may not be preset -S Str load-scheme Scheme code file to load -F Str load-functions Load scheme callout library -s Str skip-suffix Omit the file with this suffix - may not be preset - may appear multiple times -o opt select-suffix specify this output suffix - may not be preset - may appear multiple times no source-time set mod times to latest source - disabled as --no-source-time Str equate characters considered equivalent no writable Allow output files to be writable - disabled as --not-writable - may not be preset The following options are often useful while debugging new templates: Flg Arg Option-Name Description Num loop-limit Limit on increment loops it must lie in one of the ranges: -1 exactly, or 1 to 16777216 -t Num timeout Time limit for servers it must lie in the range: 0 to 3600 KWd trace tracing level of detail Str trace-out tracing output file or filter These options can be used to control what gets processed in the definitions files and template files. Flg Arg Option-Name Description -D Str define name to add to definition list - may appear multiple times -U Str undefine definition list removal pattern - an alternate for define Auto-supported Options: Flg Arg Option-Name Description -v opt version Output version information and exit -? no help Display usage information and exit -! no more-help Extended usage information passed thru pager -> opt save-opts Save the option state to an rc file -< Str load-opts Load options from an rc file - disabled as --no-load-opts - may appear multiple times Options are specified by doubled hyphens and their name or by a single hyphen and the flag character. AutoGen creates text files from templates using external definitions. The following option preset mechanisms are supported: - reading file /dev/null - reading file ./.autogenrc - examining environment variables named AUTOGEN_* The valid trace option keywords are: nothing templates block-macros expressions everything The definitions file (`') can be specified with the `definitions' option or as the command argument, but not both. Omitting it or specifying `-' will result in reading definitions from standard input. The output file names are based on the template, but generally use the base name of the definition file. If standard in is read for the definitions, then `stdin' will be used for that base name. The suffixes to the base name are gotten from the template. However, the template file may specify the entire output file name. The generated files are always created in the current directory. If you need to place output in an alternate directory, `cd' to that directory and use the `--templ_dirs' option to search the original directory. `loop-limit' is used in debugging to stop runaway expansions. please send bug reports to: autogen-bugs@lists.sf.net templ-dirs option (-L) ====================== This is the "template search directory list" option. This option has some usage constraints. It: * may appear an unlimited number of times. Add a directory to the list of directories to search when opening a template, either as the primary template or an included one. The last entry has the highest priority in the search list. That is to say, they are searched in reverse order. override-tpl option (-T) ======================== This is the "override template file" option. This option has some usage constraints. It: * may not be preset with environment variables or in initialization (rc) files. Definition files specify the standard template that is to be expanded. This option will override that name and expand a different template. lib-template option (-l) ======================== This is the "library template file" option. This option has some usage constraints. It: * may appear an unlimited number of times. DEFINE macros are saved from this template file for use in processing the main macro file. Template text aside from the DEFINE macros is is ignored. base-name option (-b) ===================== This is the "base name for output file(s)" option. This option has some usage constraints. It: * may not be preset with environment variables or in initialization (rc) files. A template may specify the exact name of the output file. Normally, it does not. Instead, the name is composed of the base name of the definitions file with suffixes appended. This option will override the base name derived from the definitions file name. This is required if there is no definitions file and advisable if definitions are being read from stdin. If the definitions are being read from standard in, the base name defaults to `stdin'. definitions option ================== This is the "definitions input file" option. This option has some usage constraints. It: * is enabled by default. * may not be preset with environment variables or in initialization (rc) files. Use this argument to specify the input definitions file with a command line option. If you do not specify this option, then there must be a command line argument that specifies the file, even if only to specify stdin with a hyphen (`-'). Specify, `--no-definitions' when you wish to process a template without any active AutoGen definitions. load-scheme option (-S) ======================= This is the "scheme code file to load" option. Use this option to pre-load Scheme scripts into the Guile interpreter before template processing begins. Please note that the AutoGen specific functions are not loaded until after argument processing. So, though they may be specified in lambda functions you define, they may not be invoked until after option processing is complete. load-functions option (-F) ========================== This is the "load scheme callout library" option. This option is used to load Guile-scheme callout functions. The automatically called initialization routine `scm_init' must be used to register these routines or data. This routine can be generated by using the following command and the `snarf.tpl' template. Read the introductory comment in `snarf.tpl' to see what the `getdefs(1AG)' comment must contain. First, create a config file for `getdefs', and then invoke `getdefs' loading that file: cat > getdefs.cfg <> Note, however, that your functions must be named: name_of_some_group_scm_<>(...) so you may wish to use a shorter group name. skip-suffix option (-s) ======================= This is the "omit the file with this suffix" option. This option has some usage constraints. It: * may appear an unlimited number of times. * may not be preset with environment variables or in initialization (rc) files. Occasionally, it may not be desirable to produce all of the output files specified in the template. (For example, only the `.h' header file, but not the `.c' program text.) To do this specify `--skip-suffix=c' on the command line. select-suffix option (-o) ========================= This is the "specify this output suffix" option. This option has some usage constraints. It: * may appear an unlimited number of times. * may not be preset with environment variables or in initialization (rc) files. If you wish to override the suffix specifications in the template, you can use one or more copies of this option. See the suffix specification in the *Note pseudo macro:: section of the info doc. source-time option ================== This is the "set mod times to latest source" option. If you stamp your output files with the `DNE' macro output, then your output files will always be different, even if the content has not really changed. If you use this option, then the modification time of the output files will change only if the input files change. This will help reduce unneeded builds. equate option ============= This is the "characters considered equivalent" option. This option will alter the list of characters considered equivalent. The default are the three characters, "_-^". (The latter is conventional on a Tandem, and I do a lot of work on the Tandem.) writable option =============== This is the "allow output files to be writable" option. This option has some usage constraints. It: * may not be preset with environment variables or in initialization (rc) files. This option will leave output files writable.Normally, output files are read-only. loop-limit option ================= This is the "limit on increment loops" option. This option prevents runaway loops. For example, if you accidentally specify, "FOR x (for-from 1) (for-to -1) (for-by 1)", it will take a long time to finish. If you do have more than 256 entries in tables, you will need to specify a new limit with this option. timeout option (-t) =================== This is the "time limit for servers" option. This option has some usage constraints. It: * must be compiled in by defining `SHELL_ENABLED' during the compilation. AutoGen works with a shell server process. Most normal commands will complete in less than 10 seconds. If, however, your commands need more time than this, use this option. The valid range is 0 to 3600 seconds (1 hour). Zero will disable the server time limit. trace option ============ This is the "tracing level of detail" option. This option will cause AutoGen to display a trace of its template processing. There are five levels: `nothing' Does no tracing at all (default) `templates' Traces the invocation of `DEFINE'd macros and `INCLUDE's `block-macros' Traces all block macros. The above, plus `IF', `FOR', `CASE' and `WHILE'. `expressions' Displays the results of expression evaluations `everything' Displays the invocation of every AutoGen macro, even `TEXT' macros. trace-out option ================ This is the "tracing output file or filter" option. The output specified may be either a file name, or, if the option argument begins with the `pipe' operator (`|'), a command that will receive the tracing output as standard in. For example, `--traceout='| less'' will run the trace output through the `less' program. show-defs option ================ This is the "show the definition tree" option. This option has some usage constraints. It: * must be compiled in by defining `DEBUG' during the compilation. * may not be preset with environment variables or in initialization (rc) files. This will print out the complete definition tree before processing the template. show-shell option ================= This is the "show shell commands" option. This option has some usage constraints. It: * must be compiled in by defining `DEBUG' during the compilation. * may not be preset with environment variables or in initialization (rc) files. This will cause `set -x' to be executed in the shell, with the resultant output printed to /dev/tty. This option will have no effect if `--disable-shell' was specified at configure time. define option (-D) ================== This is the "name to add to definition list" option. This option has some usage constraints. It: * may appear an unlimited number of times. * is a member of the define class of options. The AutoGen define names are used for the following purposes: 1. Sections of the AutoGen definitions may be enabled or disabled by using C-style #ifdef and #ifndef directives. 2. When defining a value for a name, you may specify the index for a particular value. That index may be a literal value, a define option or a value #define-d in the definitions themselves. 3. The name of a file may be prefixed with `$NAME/'. The `$NAME' part of the name string will be replaced with the define-d value for `NAME'. 4. When AutoGen is finished loading the definitions, the defined values are exported to the environment with, `putenv(3)'. These values can then be used in shell scripts with `${NAME}' references and in templates with `(getenv "NAME")'. 5. While processing a template, you may specify an index to retrieve a specific value. That index may also be a define-d value. undefine option (-U) ==================== This is the "definition list removal pattern" option. This option has some usage constraints. It: * may appear an unlimited number of times. * may not be preset with environment variables or in initialization (rc) files. * is a member of the define class of options. Just like 'C', AutoGen uses `#ifdef/#ifndef' preprocessing directives. This option will cause the matching names to be removed from the list of defined values. Configuring and Installing ************************** Configuring AutoGen =================== AutoGen is configured and built using Libtool, Automake and Autoconf. Consequently, you can install it whereever you wish using the various `--prefix' options. To the various configuration options supplied by these tools, AutoGen adds a few of its own: `--disable-shell' AutoGen is now capable of acting as a CGI forms server, *Note AutoGen CGI::. As such, it will gather its definitions using either `GET' or `POST' methods. All you need to do is have a template named `cgi.tpl' handy or specify a different one with a command line option. However, doing this without disabling the server shell brings considerable risk. If you were to pass user input to a script that contained, say, the classic "``rm -rf /`'", you might have a problem. This configuration option will cause shell template commands to simply return the command string as the result. No mistakes. Much safer. Strongly recommended. The default is to have server shell scripting enabled. Disabling the shell will have some build side effects, too. * Many of the make check tests will fail, since they assume a working server shell. * The getdefs and columns programs are not built. The options are distributed as definition files and they cannot be expanded with a shell-disabled AutoGen. * Similarly, the documentation cannot be regenerated because the documentation templates depend on subshell functionality. `--enable-debug' Turning on AutoGen debugging enables very detailed inspection of the input definitions and monitoring shell script processing. These options are not particularly useful to anyone not directly involved in maintaining AutoGen. If you do choose to enable AutoGen debugging, be aware that the usage page was generated without these options, so when the build process reaches the documentation rebuild, there will be a failure. `cd' into the `agen5' build directory, `make' the `autogen.texi' file and all will be well thereafter. `--with-regex-header' `--with-header-path' `--with-regex-lib' These three work together to specify how to compile with and link to a particular POSIX regular expression library. The value for `--with-regex-header=value' must be the name of the relevant header file. The AutoGen sources will attempt to include that source with a `#include ' C preprocessing statement. The `path' from the `--with-header-path=path' will be added to `CPPFLAGS' as `-Ipath'. The `lib-specs' from `--with-regex-lib=lib-specs' will be added to `LDFLAGS' without any adornment. AutoGen as a CGI server ======================= AutoGen is now capable of acting as a CGI forms server. It behaves as a CGI server if the definitions input is from stdin and the environment variable `REQUEST_METHOD' is defined and set to either "GET" or "POST". If set to anything else, AutoGen will exit with a failure message. When set to one of those values, the CGI data will be converted to AutoGen definitions (*note Definitions File::) and the template named "`cgi.tpl'" will be processed. This works by including the name of the real template to process in the form data and having the "`cgi.tpl'" template include that template for processing. I do this for processing the form . The "`cgi.tpl'" looks approximately like this: This forces the template to be found in the "`cgi-tpl/'" directory. Note also that there is no suffix specified in the pseudo macro (*note pseudo macro::). That tells AutoGen to emit the output to stdout. The output is actually spooled until it is complete so that, in the case of an error, the output can be discarded and a proper error message can be written in its stead. *Please also note* that it is advisable, _especially_ for network accessible machines, to configure AutoGen (*note configuring::) with shell processing disabled (`--disable-shell'). That will make it impossible for any referenced template to hand data to a subshell for interpretation. Signal Names ============ When AutoGen is first built, it tries to use `psignal(3)', `sys_siglist', `strsigno(3)' and `strsignal(3)' from the host operating system. If your system does not supply these, the AutoGen distribution will. However, it will use the distributed mapping and this mapping is unlikely to match what your system uses. This can be fixed. Once you have installed autogen, the mapping can be rebuilt on the host operating system. To do so, you must perform the following steps: 1. Build and install AutoGen in a place where it will be found in your search path. 2. `cd ${top_srcdir}/compat' 3. `autogen strsignal.def' 4. Verify the results by examining the `strsignal.h' file produced. 5. Re-build and re-install AutoGen. If you have any problems or peculiarities that cause this process to fail on your platform, please send me copies of the header files containing the signal names and numbers, along with the full path names of these files. I will endeavor to fix it. There is a shell script inside of `strsignal.def' that tries to hunt down the information. Installing AutoGen ================== There are several files that get installed. The number depend whether or not both shared and archive libraries are to be installed. The following assumes that everything is installed relative to `$prefix'. You can, of course, use `configure' to place these files where you wish. *NB* AutoGen does not contain any compiled-in path names. All support directories are located via option processing, the environment variable `HOME' or finding the directory where the executable came from. The installed files are: 1. The executables in `bin' (autogen, getdefs and columns). 2. The AutoOpts link libraries as `lib/libopts.*'. 3. An include file in `include/options.h', needed for Automated Option Processing (see next chapter). 4. Several template files and a scheme script in `share/autogen', needed for Automated Option Processing (*note AutoOpts::), parsing definitions written with scheme syntax (*note Dynamic Text::), the templates for producing documentation for your program (*note documentation attributes::), autoconf test macros, and AutoFSM. 5. Info-style help files as `info/autogen.info*'. These files document AutoGen, the option processing library AutoOpts, and several add-on components. 6. The three man pages for the three executables are installed in man/man1. This program, library and supporting files can be installed with three commands: * /configure [ ] * make * make install However, you may wish to insert `make check' before the `make install' command. If you do perform a `make check' and there are any failures, you will find the results in `/test/FAILURES'. Needless to say, I would be interested in seeing the contents of those files and any associated messages. If you choose to go on and analyze one of these failures, you will need to invoke the test scripts individually. You may do so by specifying the test (or list of test) in the TESTS make variable, thus: gmake TESTS=test-name.test check I specify `gmake' because most makes will not let you override internal definitions with command line arguments. `gmake' does. All of the AutoGen tests are written to honor the contents of the VERBOSE environment variable. Normally, any commentary generated during a test run is discarded unless the VERBOSE environment variable is set. So, to see what is happening during the test, you might invoke the following with bash or ksh: VERBOSE=1 gmake TESTS="for.test forcomma.test" check Or equivalently with csh: env VERBOSE=1 gmake TESTS="for.test forcomma.test" check Automated Option Processing *************************** AutoOpts 19.0 is bundled with AutoGen. It is a tool that virtually eliminates the hassle of processing options and keeping man pages, info docs and usage text up to date. This package allows you to specify several program attributes, up to a hundred option types and many option attributes. From this, it then produces all the code necessary to parse and handle the command line and initialization file options, and the documentation that should go with your program as well. AutoOpts is distributed under The GNU Lesser General Public License. "Lesser" meaning you have greater license with it and may link it into commercial programs. AutoOpts Features ================= AutoOpts supports option processing; option state saving; and program documentation with innumerable features. Here, we list a few obvious ones and some important ones, but the full list is really defined by all the attributes defined in the *Note Option Definitions:: section. 1. POSIX-compliant short (flag) option processing. 2. GNU-style long options processing. Long options are recognized without case sensitivity, and they may be abbreviated. 3. Environment variable initializations. 4. Initialization from RC or INI files, and saving the option state back into one. 5. Options may be marked as `dis-abled' with a disablement prefix. Such options may default to either an enabled or a disabled state. You may also provide an enablement prifix, too, e.g., `--allow-mumble' and `--prevent-mumble'. 6. Verify that required options are present between the minimum and maximum number of times on the command line. 7. Verify that conflicting options do not appear together, and that options that require the presence of other options are, in fact, used in the presence of other options. 8. Provides a callable routine to parse a text string as if it were from one of the RC/INI files. 9. `--help' and `--version' are automatically supported. `--more-help' will page the generated help. 10. By adding a `doc' and `arg-name' attributes to each option, AutoGen will also be able to produce a man page and the `invoking' section of a texinfo document. 11. Insert the option processing state into Scheme-defined variables. Thus, Guile based applications that are linked with private `main()' routines can take advantage of all of AutoOpts' functionality. 12. If `test-main' is defined, the output `.c' file will contain a main routine that will be compiled when `TEST__OPTS' is defined. *Note shell options::. If you choose to compile this program, it is currently capable of producing one of three results: a. A program that processes the arguments and writes to standard out portable shell commands containing the digested options. b. A program that will generate portable shell commands to parse the defined options. The expectation is that this result will be copied into a shell script and used there. c. `test-main' may specify a routine that will be called with a pointer to the option descriptions as the single argument. You must supply this routine and, obviously, you can cause it to do whatever you wish it to do. 13. Library suppliers can specify command line options that their client programs will accept. They specify option definitions that get `#include'-d into the client option definitions and they specify an "anchor" option that has a callback and must be invoked. That will give the library access to the option state for their options. 14. The generated usage text can be emitted in either AutoOpts standard format (maximizing the information about each option), or GNU-ish normal form. The default form is selected by either specifying or not specifying the `gnu-usage' attribute (*note information attributes::). This can be overridden by the user himself with the `AUTOOPTS_USAGE' environment variable. If it exists and is set to the string `gnu', it will force GNU-ish style format; if it is set to the string `autoopts', it will force AutoOpts standard format; otherwise, it will have no effect. Explanatory details: loading rc files ---------------- Initialization files are enabled by specifying the program attribute `homerc' (*note program attributes::). The initialization values are identified by the long option name followed by white space and any associated value. The value, if any, will continue through the end of the last line not continued with a backslash. Leading and trailing white space is stripped. Initialization files are selected both by the `homerc' entries and, optionally, via an automatically supplied command line option. The first component of the `homerc' entry may be an environment variable such as `$HOME', or it may also be `$$' (*two* dollar sign characters) to specify the directory of the executable. For example: homerc = "$$/../share/autogen"; will cause the AutoOpts library to look in the normal autogen datadir for an initialization file. The initialization files are processed in the order they are specified by the `homerc' attribute, so that each new file will normally override the settings of the previous files. A few options may be marked for `immediate action' (*note Immediate Action::). Any such options are acted upon in *reverse* order. The disabled `load-opts' (`--no-load-opts') option, for example, is an immediate action option. Its presence in the last `homerc' file will prevent the processing of any prior `homerc' files. Further initialization file processing can be *suppressed* by specifying `--no-load-opts' on the command line, or `PROGRAM_LOAD_OPTS=no' in the environment, or `no-load-opts' in any of the specified `homerc' files. saving rc files --------------- When initialization files are enabled for an application, the user is also provided with an automatically supplied `--save-opts' option. All of the known option state will be written to either the specified output file or, if it is not specified, then to the last specified `homerc' file. process a text string for options --------------------------------- The `optionLoadLine' takes two arguments: 1. The pointer to the option descriptor. 2. A pointer to a NUL-terminated string that contains a long option name followed, optionally, by a string value. Leading and trailing white space is trimmed from the value, but otherwise new lines are not discarded. The caller is expected to have NUL terminated the string at the correct point. Quick Start =========== Since it is generally easier to start with a simple example than it is to look at the options that AutoGen uses itself, here is a very simple AutoOpts example. You can copy this example out of the Info file and into a source file to try it. You can then embellish it into what you really need. For more extensive examples, you can also examine the help output and option definitions for the commands `columns', `getdefs' and `autogen' itself. For our simple example, assume you have a program named `check' that takes two options: 1. A list of directories to check over for whatever it is `check' does. You want this option available as a POSIX-style flag option and a GNU long option. You want to allow as many of these as the user wishes. 2. An option to show or not show the definition tree being used. Only one occurrence is to be allowed, specifying one or the other. First, specify your program attributes and its options to AutoOpts, as with the following example. AutoGen Definitions options; prog-name = check; prog-title = "Checkout Automated Options"; long-opts; test_main; flag = { name = check_dirs; value = L; /* flag style option character */ arg_type = string; /* option argument indication */ max = NOLIMIT; /* occurrence limit (none) */ stack_arg; /* save opt args in a stack */ descrip = "Checkout directory list"; }; flag = { name = show_defs; descrip = "Show the definition tree"; disable = dont; /* mark as enable/disable type */ /* option. Disable as `dont-' */ }; Then perform the following steps: 1. `autogen checkopt.def' 2. `cc -o check -DTEST_CHECK_OPTS -g checkopt.c -L $prefix/lib -lopts' And now, `./check --help' yields: check - Checkout Automated Options USAGE: check [- []]... [--[{=| }]]... Flg Arg Option-Name Description -L YES check-dirs Checkout directory list - may appear without limit no show-defs Show the definition tree - disabled as --dont-show-defs -? no help Display usage information and exit -! no more-help Extended usage information passed thru pager Options may be specified by doubled markers and their name or by a single marker and the flag character/option value. Normally, however, you would compile `checkopt.c' as in: cc -o checkopt.o -I$prefix/include -c checkopt.c and link `checkopt.o' with the rest of your program. The main program causes the options to be processed by calling `optionProcess' (*note libopts-optionProcess::): main( int argc, char** argv ) { { int optct = optionProcess( &checkOptions, argc, argv ); argc -= optct; argv += optct; } The options are tested and used as in the following fragment: if (HAVE_OPT( SHOW_DEFS ) && HAVE_OPT( CHECK_DIRS )) { int dirct = STACKCT_OPT( CHECK_DIRS ); char** dirs = STACKLST_OPT( CHECK_DIRS ); while (dirct-- > 0) { char* dir = *dirs++; ... A lot of magic happens to make this happen. The rest of this chapter will describe the myriad of option attributes supported by AutoOpts. However, keep in mind that, in general, you won't need much more than what was described in this "quick start" section. Option Definitions ================== AutoOpts uses an AutoGen definitions file for the definitions of the program options and overall configuration attributes. The complete list of program and option attributes is quite extensive, so if you are reading to understand how to use AutoOpts, I recommend reading the "Quick Start" section (*note Quick Start::) and paying attention to the following: 1. `prog-name', `prog-title', and `argument', program attributes, *Note program attributes::. 2. `name' and `descrip' option attributes, *Note Required Attributes::. 3. `value' (flag character) and `min' (occurrence counts) option attributes, *Note Common Attributes::. 4. `arg-type' from the option argument specification section, *Note Option Arguments::. 5. Read the overall how to, *Note Using AutoOpts::. 6. Highly recommended, but not required, are the several "man" and "info" documentation attributes, *Note documentation attributes::. Keep in mind that the majority are rarely used and can be safely ignored. However, when you have special option processing requirements, the flexibility is there. Program Description Attributes ------------------------------ The following global definitions are used to define attributes of the entire program. These generally alter the configuration or global behavior of the AutoOpts option parser. The first two are required of every program. The rest have been alphabetized. Except as noted, there may be only one copy of each of these definitions: `prog-name' This attribute is required. Variable names derived from this name are derived using `string->c_name!' (*note SCM string->c-name!::). `prog-title' This attribute is required and may be any descriptive text. `allow-errors' The presence of this attribute indicates ignoring any command line option errors. This may also be turned on and off by invoking the macros `ERRSKIP_OPTERR' and `ERRSTOP_OPTERR' from the generated interface file. `argument' Specifies the syntax of the arguments that *follow* the options. It may not be empty, but if it is not supplied, then option processing must consume all the arguments. If it is supplied and starts with an open bracket (`['), then there is no requirement on the presence or absence of command line argument following the options. Lastly, if it is supplied and does not start with an open bracket, then option processing must *not* consume all of the command line arguments. `environrc' Indicates looking in the environment for values of variables named, `PROGRAM_OPTNAME', where `PROGRAM' is the upper cased `C-name' of the program and `OPTNAME' is the upper cased `C-name' of the option. The `C-name's are the regular names with all special characters converted to underscores (`_'). If a particular option may be disabled, then its disabled state is indicated by setting the value to the disablement prefix. So, for example, if the disablement prefix were `dont', then you can disable the `optname' option by setting the `PROGRAM_OPTNAME'' environment variable to `dont'. *Note Common Attributes::. `export' This string is inserted into the .h interface file. Generally used for global variables or `#include' directives required by `flag_code' text and shared with other program text. Do not specify your configuration header (`config.h') in this attribute or the `include' attribute, however. Instead, use `config-header', below. `config-header' The contents of this attribute should be just the name of the configuration file. A "#include" naming this file will be inserted at the top of the generated header. `homerc' Specifies either a directory or a file using a specific path (like `.' or `/usr/local/share/progname') or an environment variable (like `$HOME/rc/' or `$PREFIX/share/progname') or the directory where the executable was found (`$$[/...]') to use to try to find the rcfile. Use as many as you like. The presence of this attribute activates the `--save-opts' and `--load-opts' options. *Note loading rc files::. `include' This string is inserted into the .c file. Generally used for global variables required only by `flag_code' program text. `long-opts' Presence indicates GNU-standard long option processing. If any options do not have an option value (flag character) specified, and least one does specify such a value, then you must specify `long-opts'. If none of your options specify an option value (flag character) and you do not specify `long-opts', then command line arguments are processed in "named option mode". This means that: * Every command line argument must be a long option. * The flag markers `-' and `--' are completely optional. * The `argument' program attribute is disallowed. * One of the options may be specified as the default (as long as it has a required option argument). `prefix' This value is inserted into *all* global names. This will disambiguate them if more than one set of options are to be compiled into a single program. `rcfile' Specifies the initialization file name. This is only useful if you have provided at least one `homerc' attribute. default: .rc `version' Specifies the program version and activates the VERSION option, *Note automatic options::. Generated main Procedures ------------------------- AutoOpts can generate the main procedure in certain circumstances. It will do this to help with integrating with the guile library environment, and for creating a program to convert command line options into environment variables for use in processing shell script options and for testing the command line interface. `before-guile-boot' If `guile-main' has been specified and if this is specified as well, then this code will be inserted into the actual `main()' procedure before `gh_enter()' is called. `guile-main' Creates a guile-style main and inner-main procedures. The inner main procedure will call `optionProcess()' and will invoke any code specified by this attribute. If this attribute does not specify any code, then calls to the AutoOpts library procedure `export_options_to_guile()' and then `scm_shell()' will be inserted into `inner_main()'. `main-text' If you need to specify the content of the main procedure generated for the "option testing" program, you can do that with this attribute. The result will be a procedure that looks like this: int main( int argc, char** argv ) { [+ main-text +] return EXIT_SUCCESS; } `test-main' Creates a test main procedure for testing option processing. The resulting program may also be used for several purposes. 1. If the text of `test-main' is short (3 or fewer characters), the generated main() will call putBourneShell. That routine will emit Bourne shell commands that can be eval-ed by a Bourne-derived shell to incorporate the digested options into the shell's environment, *Note shell options::. You would use it thus: eval "`./programopts $@`" test -z "${OPTION_CT}" ] && exit 1 test ${OPTION_CT} -gt 0 && shift ${OPTION_CT} 2. If the text of `test-main' contains `putShellParse', the program will generate portable Bourne shell commands that will parse the command line options. The expectation is that this result will be copied into a shell script and used there, *Note shell options::. 3. Any other text must be the name of a routine that you will write yourself. That routine will be called after processing the command line options and it will be passed the option processing descriptor pointer as its sole argument. Program Information Attributes ------------------------------ These attributes are used to define how and what information is displayed to the user of the program. `copyright' The `copyright' is a structured value containing three to five values. If `copyright' is used, then the first three are required. 1. `date' - the list of applicable dates for the copyright. 2. `owner' - the name of the copyright holder. 3. `type' - specifies the type of distribution license. AutoOpts/AutoGen will automatically support the text of the GNU Public License (`GPL'), the GNU General Public License with Library extensions (`LGPL'), the Free BSD license (`BSD'), and a write-it-yourself copyright notice (`NOTE'). Only these values are recognized. 4. `text' - the text of the copyright notice. It is only needed if `type' is set to `NOTE'. 5. `author' - in case the author name is to appear in the documentation and is different from the copyright owner. 6. `eaddr' - email address of the author or copyright holder. An example of this might be: copyright = { date = "1992-2003"; owner = "Bruce Korb"; eaddr = 'bkorb@gnu.org'; type = GPL; }; `detail' This string is added to the usage output when the HELP option is selected. `explain' Gives additional information whenever the usage routine is invoked.. `preserve-case' This attribute will not change anything except appearance. Normally, the option names are all documented in lower case. However, if you specify this attribute, then they will display in the case used in their specification. Command line options will still be matched without case sensitivity. `prog-desc *and*' `opts-ptr' These define global pointer variables that point to the program descriptor and the first option descriptor for a library option. This is intended for use by certain libraries that need command line and/or initialization file option processing. These definitions have no effect on the option template output, but are used for creating a library interface file. Normally, the first "option" for a library will be a documentation option that cannot be specified on the command line, but is marked as `settable'. The library client program will invoke the `SET_OPTION' macro which will invoke a handler function that will finally set these global variables. `rcsection' If you have a collection of option descriptions that are intended to use the same RC/ini files, then you will likely want to partition that file. That will be possible by specifying this attribute with AutoOpts version 9.2 and later. Every RC file will be considered partitioned by lines that commence with the square open bracket (`['). All text before such a line is always processed. Once such a line is found, the *upper-cased* c-variable-syntax program name will be compared against the text following that bracket. If there is a match and the next character after that is a square close bracket (`]'), then the section is processed and the file closed. Otherwise, the section is ignored and a matching section is searched for. For exampe, if the `fumble-stumble' options had a sectioned RC file, then a line containing `[FUMBLE_STUMBLE]' would be searched for. `usage' Optionally names the usage procedure, if the library routine `optionUsage()' does not work for you. If you specify `gnu_usage' as the value of this attribute, for example, you will use a procedure by that name for displaying usage. Of course, you will need to provide that procedure. `gnu-usage' Normally, the default format produced by the `optionUsage' procedure is AutoOpts Standard. By specifying this attribute, the default format will be GNU-ish style. Either default may be overridden by the user with the `AUTOOPTS_USAGE' environment variable. If it is set to `gnu' or `autoopts', it will alter the style appropriately. This attribute will conflict with the `usage' attribute. Option Attributes ----------------- For each option you wish to specify, you must have a block macro named `flag' defined. There are two required attributes: `name' and `descrip'. If any options do not have a `value' (traditional flag character) attribute, then the `long-opts' global text macro must also be defined. As a special exception, if no options have a `value' *and* `long-opts' is not defined *and* `argument' is not defined, then all arguments to the program are named. In this case, the `-' and `--' command line option markers are optional. Required Attributes ................... Every option must have exactly one copy of both of these attributes. `name' Long name for the option. Even if you are not accepting long options and are only accepting flags, it must be provided. AutoOpts generates private, named storage that requires this name. `descrip' Except for documentation options, a *very* brief description of the option. About 40 characters on one line, maximum. It appears on the `usage()' output next to the option name. If, however, the option is a documentation option, it will appear on one or more lines by itself. It is thus used to visually separate and comment upon groups of options in the usage text. Common Option Attributes ........................ These option attributes are optional. Any that do appear in the definition of a flag, may appear only once. `value' The flag character to specify for traditional option flags. e.g. `-L'. `max' Maximum occurrence count (invalid if DISABLE present). `min' Minimum occurrence count. If present, then the option *must* appear on the command line. Preset values do not count towards the minimum occurrence count. `must-set' If an option must be specified, but it need not be specified on the command line, then specify this attribute for the option. `enable' Long-name prefix for enabling the option (invalid if DISABLE *not* present). Only useful if long option names are being processed. `disable' Prefix for disabling (inverting sense of) the option. Only useful if long option names are being processed. `enabled' If default is for option being enabled. (Otherwise, the OPTST_DISABLED bit is set at compile time.) Only useful if the option can be disabled. `ifdef' `ifndef' If an option is relevant on certain platforms or when certain features are enabled or disabled, you can specify the compile time flag used to indicate when the option should be compiled in or out. For example, if you have a configurable feature, `mumble' that is indicated with the compile time define, `WITH_MUMBLING', then add: ifdef = WITH_MUMBLING; Note that case and spelling must match whatever you are using. Do not confuse these attributes with the AutoGen directives of the same names, *Note Directives::. These cause C pre-processing directives to be inserted into the generated C text. Special Option Handling ....................... These option attributes do not fit well with other categories. `no-preset' If presetting this option is not allowed. (Thus, environment variables and values set in rc/ini files will be ignored.) `settable' If the option can be set outside of option processing. If this attribute is defined, special macros for setting this particular option will be inserted into the interface file. For example, `TEMPL_DIRS' is a settable option for AutoGen, so a macro named `SET_OPT_TEMPL_DIRS(a)' appears in the interface file. This attribute interacts with the DOCUMENTATION attribute. `equivalence' Generally, when several options are mutually exclusive and basically serve the purpose of selecting one of several processing modes, these options can be considered an equivalence class. Sometimes, it is just easier to deal with them as such. For an option equivalence class, there is a single occurrence counter for all the members of the class. All members of the equivalence class must contain the same equivalenced-to option, including the equivalenced-to option itself. Thus, it must be a member. As an example, `cpio(1)' has three options `-o', `-i', and `-p' that define the operational mode of the program (`create', `extract' and `pass-through', respectively). They form an equivalence class from which one and only one member must appear on the command line. If `cpio' were an AutoOpt-ed program, then each of these option definitions would contain: equivalence = create; and the program would be able to determine the operating mode with code that worked something like this: switch (WHICH_IDX_CREATE) { case INDEX_OPT_CREATE: ... case INDEX_OPT_EXTRACT: ... case INDEX_OPT_PASS_THROUGH: ... default: /* cannot happen */ } `documentation' This attribute means the option exists for the purpose of separating option description text in the usage output. Libraries may choose to make it settable so that the library can determine which command line option is the first one that pertains to the library. If present, this option disables all other attributes except `settable', `call_proc' and `flag_code'. `settable' must be and is only specified if `call_proc' or `flag_code' has been specified. When present, the `descrip' attribute will be displayed only when the `--help' option has been specified. It will be displayed flush to the left hand margin and may consist of one or more lines of text. The name of the option will not be printed. Documentation options are for clarifying the usage text and will not appear in generated man pages or in the generated invoking texinfo doc. Immediate Action Attributes ........................... Certain options may need to be processed early. For example, in order to suppress the processing of RC files, it is necessary to process the command line option `--no-load-opts' *before* the RC files are processed. To accommodate this, certain options may have their enabled or disabled forms marked for immediate processing. The consequence of this is that they are processed ahead of all other options in the reverse of normal order. Normally, the first options processed are the options specified in the first `homerc' file, followed by then next `homerc' file through to the end of RC file processing. Next, environment variables are processed and finally, the command line options. The later options override settings processed earlier. That actually gives them higher priority. Command line immediate action options actually have the lowest priority of all. They would be used only if they are to have an effect on the processing of subsequent options. `immediate' Use this option attribute to specify that the enabled form of the option is to be processed immediately. The `help' and `more-help' options are so specified. They will also call `exit()' upon completion, so they *do* have an effect on the processing of the remaining options :-). `immed-disable' Use this option attribute to specify that the disabled form of the option is to be processed immediately. The `load-opts' option is so specified. The `--no-load-opts' command line option will suppress the processing of RC files and environment variables. Contrariwise, the `--load-opts' command line option is processed normally. That means that the options specified in that file will be processed after all the `homerc' files and, in fact, after options that precede it on the command line. Option Conflict Attributes .......................... These attributes may be used as many times as you need. They are used at the end of the option processing to verify that the context within which each option is found does not conflict with the presence or absence of other options. This is not a complete cover of all possible conflicts and requirements, but it simple to implement and covers the more common situations. `flags-must' one entry for every option that *must* be present when this option is present `flags-cant' one entry for every option that *cannot* be present when this option is present Option Argument Specification ............................. Several attributes relate to the handling of arguments to options. Each may appear only once, except for the `arg-range' attribute. It may appear as often as may be needed. `arg-type' This specifies the type of argument the option will take. If not present, the option cannot take an argument. If present, it must be one of the following four. The bracketed part of the name is optional. `str[ing]' The argument may be any arbitrary string. `num[ber]' The argument must be a correctly formed integer, without any trailing U's or L's. If you specify your own callback validation routine, read the `arg-range' section below for some considerations. AutoOpts contains a library procedure to convert the string to a number. If you specify range checking with `arg-range', then AutoOpts produces a special purpose procedure for this option. `bool[ean]' The argument will be interpreted and always yield either AG_TRUE or AG_FALSE. False values are the empty string, the number zero, or a string that starts with `f', `F', `n' or `N' (representing False or No). Anything else will be interpreted as True. `key[word]' The argument must match a specified list of strings. Assuming you have named the option, `optn-name', the strings will be converted into an enumeration of type `te_Optn_Name' with the values `OPTN_NAME_KEYWORD'. If you have *not* specified a default value, the value `OPTN_NAME_UNDEFINED' will be inserted with the value zero. The option will be initialized to that value. You may now use this in your code as follows: te_Optn_Name opt = OPT_VALUE_OPTN_NAME; switch (opt) { case OPTN_NAME_UNDEFINED: /* undefined things */ break; case OPTN_NAME_KEYWORD: /* `keyword' things */ break; default: /* utterly impossible */ ; } AutoOpts produces a special purpose procedure for this option. `keyword' If the `arg-type' is `keyword', then you must specify the list of keywords by a series of `keyword' entries. The interface file will contain an enumeration of `_' for each keyword entry. `arg-optional' This attribute indicates that the user does not have to supply an argument for the option. This is only valid if the ARG-TYPE is `string' or `keyword'. If it is `keyword', then this attribute may also specify the default keyword to assume when the argument is not supplied. If left empty, ARG-DEFAULT or the zero-valued keyword will be used. `arg-default' This specifies the default value to be used when the option is not specified or preset. `default' If your program processes its arguments in named option mode (See "long-opts" in *Note program attributes::), then you may select *one* of your options to be the default option. Do so with this attribute. The option so specified must have an `arg-type' specified, but not the `arg-optional' attribute. That is to say, the option argument must be required. If you have done this, then any arguments that do not match an option name and do not contain an equal sign (`=') will be interpreted as an option argument to the default option. `arg-range' If the `arg-type' is `number', then `arg-range's may be specified, too. If you specify one or more of these option attributes, then AutoOpts will create a callback procedure for handling it. The argument value supplied for the option must match one of the range entries. Each arg-range should consist of either an integer by itself or an integer range. The integer range is specified by one or two integers separated by the two character sequence, `->'. The generated procedure imposes some constraints: * A number by itself will match that one value. * The high end of the range may not be `INT_MIN', both for obvious reasons and because that value is used to indicate a single-valued match. * An omitted lower value implies a lower bound of INT_MIN. * An omitted upper value implies a upper bound of INT_MAX. * The argument value is required. It may not be optional. The usage procedure displays these ranges by calling the callback with the `pOptDesc' pointer set to `NULL'. Therefore, all callback procedures designed to handle options with numeric arguments *must* be prepared to handle a call with that pointer set `NULL'. Option Argument Handling ........................ AutoOpts will automatically generate a callback procedure for options with enumerated keyword arguments and numeric arguments with range checking. If you have specified such an option, you may not specify any of the attributes listed here. Otherwise, you may pick zero or one of the following attributes. The first two attributes interact with the `documentation' and `settable' attributes, *Note Special Option Handling::. `flag-code' statements to execute when the option is encountered. The generated procedure will look like this: static void doOpt( tOptions* pOptions, tOptDesc* pOptDesc ) { } Only certain fields within the `tOptions' and `tOptDesc' structures may be accessed. *Note Option Processing Data::. `extract-code' This is effectively identical to `flag_code', except that the source is kept in the output file instead of the definitions file. A long comment is used to demarcate the code. You must not modify that marker. Before regenerating the option code file, the old file is renamed from MUMBLE.c to MUMBLE.c.save. The template will be looking there for the text to copy into the new output file. `call-proc' external procedure to call when option is encountered. The calling sequence must conform to the sequence defined above for the generated procedure, `doOpt'. It has the same restrictions regarding the fields within the structures passed in as arguments. *Note Option Processing Data::. `flag-proc' Name of another option whose `flag_code' can be executed when this option is encountered. `stack-arg' Call a special library routine to stack the option's arguments. Special macros in the interface file are provided for determining how many of the options were found (`STACKCT_OPT(NAME)') and to obtain a pointer to a list of pointers to the argument values (`STACKLST_OPT(NAME)'). Obviously, for a stackable argument, the `max' attribute needs to be set higher than `1'. If two options are equivalenced (*note Special Option Handling::) and specify this attribute, then the "equivalenced-to" option will add entries to the stack, and the "equivalencing" option, if specified, will remove entries that match the regular expression argument. The pattern, "`.*'" will efficiently remove all the entries in the stack. It would not be useful to have more than two options in this equivalence class. If the stacked option has a disablement prefix, then the entire stack of arguments will be cleared even more efficiently than the "`.*'" regular expression. A stacked, equivalencing option with a disablement prefix will cause undefined results. If all of this is confusing, then don't mess with equivalenced stacked option arguments. If you really want to know, the AutoGen `--define' option (*note autogen define::) has a stacked argument, and `--undefine' (*note autogen undefine::) is equivalenced to it. Man and Info doc Attributes --------------------------- AutoOpts includes AutoGen templates for producing abbreviated man pages and for producing the invoking section of an info document. To take advantage of these templates, you must add several attributes to your option definitions. `doc' First, every `flag' definition _other than_ "documentation" definitions, must have a `doc' attribute defined. If the option takes an argument, then it will need an `arg-name' attribute as well. The `doc' text should be in plain sentences with minimal formatting. The Texinfo commands `@code', and `@var' will have its enclosed text made into *\fB* entries in the man page, and the `@file' text will be made into *\fI* entries. The `arg-name' attribute is used to display the option's argument in the man page. Options marked with the "documentation" attribute are for documenting the usage text. All other options should have the "doc" attribute in order to document the usage of the option in the generated man pages. `arg-name' If an option has an argument, the argument should have a name for documentation purposes. It will default to `arg-type', but it will likely be clearer with something else like, `file-name' instead of `string' (the type). `prog-man-descrip' `prog-info-descrip' Then, you need to supply a brief description of what your program does. If you already have a `detail' definition, this may be sufficient. If not, or if you need special formatting for one of the manual formats, then you will need either a definition for `prog-man-descrip' or `prog-info-descrip' or both. These will be inserted verbatim in the man page document and the info document, respectively. `man-doc' Finally, if you need to add man page sections like `SEE ALSO' or `USAGE' or other, put that text in a `man-doc' definition. This text will be inserted verbatim in the man page after the `OPTIONS' section and before the `AUTHOR' section. Automatically Supported Options ------------------------------- AutoOpts provides automated support for five options. `help' and `more-help' are always provided. `version' is provided if `version' is defined in the option definitions *Note program attributes::. `save-opts' and `load-opts' are provided if at least one `homerc' is defined *Note program attributes::. Below are the option names and flag values. The flags are activated if and only if at least one user-defined option also uses a flag value. These flags may be deleted or changed to characters of your choosing by specifying `xxx-value = "y";', where `xxx' is one of the five names below and `y' is either empty or the character of your choice. For example, to change the help flag from `?' to `h', specify `help-value = "h";'; and to require that `save-opts' be specified only with its long option name, specify `save-opts-value = "";'. `help -?' This option will immediately invoke the `USAGE()' procedure and display the usage line, a description of each option with its description and option usage information. This is followed by the contents of the definition of the `detail' text macro. `more-help -!' This option is identical to the `help' option, except that it also includes the contents of the `detail-file' file (if provided and found), plus the output is passed through a pager program. (`more' by default, or the program identified by the `PAGER' environment variable.) `version -v' This will print the program name, title and version. If it is followed by the letter `c' and a value for `copyright' and `owner' have been provided, then the copyright will be printed, too. If it is followed by the letter `n', then the full copyright notice (if available) will be printed. `save-opts ->' This option will cause the option state to be printed in RC/INI file format when option processing is done but not yet verified for consistency. The program will terminate successfully without running when this has completed. Note that for most shells you will have to quote or escape the flag character to restrict special meanings to the shell. The output file will be the RC/INI file name (default or provided by `rcfile') in the last directory named in a `homerc' definition. This option may be set from within your program by invoking the "`SET_OPT_SAVE_OPTS(filename)'" macro (*note SET_OPT_name::). Invoking this macro will set the file name for saving the option processing state, but the state will *not* actually be saved. You must call `optionSaveFile' to do that (*note libopts-optionSaveFile::). *CAVEAT:* if, after invoking this macro, you call `optionProcess', the option processing state will be saved to this file and `optionProcess' will not return. You may wish to invoke `CLEAR_OPT( SAVE_OPTS )' (*note CLEAR_OPT::) beforehand. `load-opts -<' This option will load options from the named file. They will be treated exactly as if they were loaded from the normally found RC/INI files, but will not be loaded until the option is actually processed. This can also be used within an RC/INI file causing them to nest. It is ultimately intended that specifying the option, `no-load-opts' will suppress the processing of rc/ini files and environment variables. To do this, AutoOpts must first implement pre-scanning of the options, environment and rc files. Library of Standard Options --------------------------- AutoOpts has developed a set of standardized options. You may incorporate these options in your program simply by _first_ adding a `#define' for the options you want, and then the line, #include stdoptions.def in your option definitions. The supported options are specified thus: #define DEBUG #define DIRECTORY #define DRY_RUN #define INPUT #define INTERACTIVE #define OUTPUT #define WARN #define SILENT #define QUIET #define BRIEF #define VERBOSE By default, only the long form of the option will be available. To specify the short (flag) form, suffix these names with `_FLAG'. e.g., #define DEBUG_FLAG `--silent', `--quiet', `--brief' and `--verbose' are related in that they all indicate some level of diagnostic output. These options are all designed to conflict with each other. Instead of four different options, however, several levels can be incorporated by `#define'-ing `VERBOSE_ENUM'. In conjunction with `VERBOSE', it incorporates the notion of 5 levels in an enumeration: `silent', `quiet', `brief', `informative' and `verbose'; with the default being `brief'. Programmatic Interface ====================== The user interface for access to the argument information is completely defined in the generated header file and in the portions of the distributed file "options.h" that are marked "public". In the following macros, text marked `' or `name' is the name of the option *in upper case* and *segmented with underscores `_'*. The macros and enumerations defined in the options header (interface) file are used as follows: To see how these `#define' macros are used in a program, the reader is referred to the several `opts.h' files included with the AutoGen sources. Data for Option Processing -------------------------- This section describes the data that may be accessed from within the option processing callback routines. The following fields may be used in the following ways and may be used for read only. The first set is addressed from the `tOptDesc*' pointer: `optIndex' `optValue' These may be used by option procedures to determine which option they are working on (in case they handle several options). `optActualIndex' `optActualValue' These may be used by option procedures to determine which option was used to set the current option. This may be different from the above if the options are members of an equivalence class. `optOccCt' If AutoOpts is processing command line arguments, then this value will contain the current occurrence count. During the option preset phase (reading rc/ini files and examining environment variables), the value is zero. `fOptState' The field may be tested for the following bit values (prefix each name with `OPTST_', e.g. `OPTST_INIT'): `INIT' Initial compiled value. As a bit test, it will always yield FALSE. `SET' The option was set via the `SET_OPT()' macro. `PRESET' The option was set via an RC/INI file, or a call to the `optionLoadLine()' routine. `DEFINED' The option was set via a command line option. `SET_MASK' This is a mask of flags that show the set state, one of the above four values. `EQUIVALENCE' This bit is set when the option was selected by an equivalenced option. `DISABLED' This bit is set if the option is to be disabled. (Meaning it was a long option prefixed by the disablement prefix, or the option has not been specified yet and initializes as `disabled'.) As an example of how this might be used, in AutoGen I want to allow template writers to specify that the template output can be left in a writable or read-only state. To support this, there is a Guile function named `set-writable' (*note SCM set-writable::). Also, I provide for command options `--writable' and `--not-writable'. I give precedence to command line and RC file options, thus: switch (STATE_OPT( WRITABLE )) { case OPTST_DEFINED: case OPTST_PRESET: fprintf( stderr, zOverrideWarn, pCurTemplate->pzFileName, pCurMacro->lineNo ); break; default: if (gh_boolean_p( set ) && (set == SCM_BOOL_F)) CLEAR_OPT( WRITABLE ); else SET_OPT_WRITABLE; } `pzLastArg' Pointer to the latest argument string. BEWARE If the argument type is numeric or an enumeration, then this will be the argument *value* and not a pointer to a string. The following two fields are addressed from the `tOptions*' pointer: `pzProgName' Points to a NUL-terminated string containing the current program name, as retrieved from the argument vector. `pzProgPath' Points to a NUL-terminated string containing the full path of the current program, as retrieved from the argument vector. (If available on your system.) Note these fields get filled in during the first call to `optionProcess()'. All other fields are private, for the exclusive use of AutoOpts code and is subject to change. CLEAR_OPT( ) - Clear Option Markings ------------------------------------------- Make as if the option had never been specified. `HAVE_OPT()' will yield `FALSE' after invoking this macro. COUNT_OPT( ) - Definition Count -------------------------------------- This macro will tell you how many times the option was specified on the command line. It does not include counts of preset options. if (COUNT_OPT( NAME ) != desired-count) { make-an-undesirable-message. } DESC( ) - Option Descriptor ---------------------------------- This macro is used internally by other AutoOpt macros. It is not for general use. It is used to obtain the option description corresponding to its *UPPER CASED* option name argument. This is primarily used in other macro definitions. DISABLE_OPT_name - Disable an option ------------------------------------ This macro is emitted if it is both settable and it can be disabled. If it cannot be disabled, it may always be CLEAR-ed (see above). The form of the macro will actually depend on whether the option is equivalenced to another, and/or has an assigned handler procedure. Unlike the `SET_OPT' macro, this macro does not allow an option argument. DISABLE_OPT_NAME; ENABLED_OPT( ) - Is Option Enabled? ------------------------------------------ Yields true if the option defaults to disabled and `ISUNUSED_OPT()' would yield true. It also yields true if the option has been specified with a disablement prefix, disablement value or the `DISABLE_OPT_NAME' macro was invoked. ERRSKIP_OPTERR - Ignore Option Errors ------------------------------------- When it is necessary to continue (return to caller) on option errors, invoke this option. It is reversible. *Note ERRSTOP_OPTERR::. ERRSTOP_OPTERR - Stop on Errors ------------------------------- After invoking this macro, if `optionProcess()' encounters an error, it will call `exit(1)' rather than return. This is the default processing mode. It can be overridden by specifying `allow-errors' in the definitions file, or invoking the macro *Note ERRSKIP_OPTERR::. HAVE_OPT( ) - Have this option? -------------------------------------- This macro yields true if the option has been specified in any fashion at all. It is used thus: if (HAVE_OPT( NAME )) { ; } ISSEL_OPT( ) - Is Option Selected? ----------------------------------------- This macro yields true if the option has been specified either on the command line or via a SET/DISABLE macro. ISUNUSED_OPT( ) - Never Specified? ----------------------------------------- This macro yields true if the option has never been specified, or has been cleared via the `CLEAR_OPT()' macro. OPTION_CT - Full Count of Options --------------------------------- The full count of all options, both those defined and those generated automatically by AutoOpts. This is primarily used to initialize the program option descriptor structure. OPT_ARG( ) - Option Argument String ------------------------------------------ The option argument value as a pointer to string. Note that argument values that have been specified as numbers are stored as numbers or keywords. For such options, use instead the `OPT_VALUE_name' define. It is used thus: if (HAVE_OPT( NAME )) { char* p = OPT_ARG( NAME ); ; } OPT_VALUE_name - Option Argument Value -------------------------------------- This macro gets emitted only for options that take numeric or keyword arguments. The macro yields a word-sized integer containing the enumeration or numeric value of the option argument. int opt_val = OPT_VALUE_NAME; RESTART_OPT( n ) - Resume Option Processing ------------------------------------------- If option processing has stopped (either because of an error or something was encountered that looked like a program argument), it can be resumed by providing this macro with the index `n' of the next option to process and calling `optionProcess()' again. SET_OPT_name - Force an option to be set ---------------------------------------- This macro gets emitted only when the given option has the `settable' attribute specified. The form of the macro will actually depend on whether the option is equivalenced to another, has an option argument and/or has an assigned handler procedure. If the option has an argument, then this macro will too. Beware that the argument is not reallocated, so the value must not be on the stack or deallocated in any other way for as long as the value might get referenced. If you have supplied at least one `homerc' file (*note program attributes::), this macro will be emitted for the `--save-opts' option. SET_OPT_SAVE_OPTS( "filename" ); *Note automatic options::, for a discussion of the implications of using this particular example. STACKCT_OPT( ) - Stacked Arg Count ----------------------------------------- When the option handling attribute is specified as `stack_arg', this macro may be used to determine how many of them actually got stacked. Do not use this on options that have not been stacked or has not been specified (the `stack_arg' attribute must have been specified, and `HAVE_OPT()' must yield TRUE). Otherwise, you will likely seg fault. if (HAVE_OPT( NAME )) { int ct = STACKCT_OPT( NAME ); char** pp = STACKLST_OPT( NAME ); do { char* p = *pp++; do-things-with-p; } while (--ct > 0); } STACKLST_OPT( ) - Argument Stack --------------------------------------- The address of the list of pointers to the option arguments. The pointers are ordered by the order in which they were encountered in the option presets and command line processing. Do not use this on options that have not been stacked or has not been specified (the `stack_arg' attribute must have been specified, and `HAVE_OPT(