[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

8.2.1 Invoking autom4te

The command line arguments are modeled after M4's:

 
autom4te options files

where the files are directly passed to m4. In addition to the regular expansion, it handles the replacement of the quadrigraphs (see section 8.1.5 Quadrigraphs), and of `__oline__', the current line in the output. It supports an extended syntax for the files:

`file.m4f'
This file is an M4 frozen file. Note that all the previous files are ignored. See the option `--melt' for the rationale.

`file?'
If found in the library path, the file is included for expansion, otherwise it is ignored instead of triggering a failure.

Of course, it supports the Autoconf common subset of options:

`--help'
`-h'
Print a summary of the command line options and exit.

`--version'
`-V'
Print the version number of Autoconf and exit.

`--verbose'
`-v'
Report processing steps.

`--debug'
`-d'
Don't remove the temporary files and be even more verbose.

`--include=dir'
`-I dir'
Also look for input files in dir. Multiple invocations accumulate.

`--output=file'
`-o file'
Save output (script or trace) to file. The file `-' stands for the standard output.

As an extension of m4, it includes the following options:

`--warnings=category'
`-W category'
Report the warnings related to category (which can actually be a comma separated list). See section 9.3 Reporting Messages, macro AC_DIAGNOSE, for a comprehensive list of categories. Special values include:

`all'
report all the warnings

`none'
report none

`error'
treats warnings as errors

`no-category'
disable warnings falling into category

Warnings about `syntax' are enabled by default, and the environment variable WARNINGS, a comma separated list of categories, is honored. autom4te -W category will actually behave as if you had run:

 
autom4te --warnings=syntax,$WARNINGS,category

If you want to disable autom4te's defaults and WARNINGS, but (for example) enable the warnings about obsolete constructs, you would use `-W none,obsolete'.

autom4te displays a back trace for errors, but not for warnings; if you want them, just pass `-W error'. For instance, on this `configure.ac':

 
AC_DEFUN([INNER],
[AC_RUN_IFELSE([AC_LANG_PROGRAM([exit (0)])])])

AC_DEFUN([OUTER],
[INNER])

AC_INIT
OUTER

you get:

 
$ autom4te -l autoconf -Wcross
configure.ac:8: warning: AC_RUN_IFELSE called without default \
to allow cross compiling
$ autom4te -l autoconf -Wcross,error -f
configure.ac:8: error: AC_RUN_IFELSE called without default \
to allow cross compiling
acgeneral.m4:3044: AC_RUN_IFELSE is expanded from...
configure.ac:2: INNER is expanded from...
configure.ac:5: OUTER is expanded from...
configure.ac:8: the top level

`--melt'
`-m'
Do not use frozen files. Any argument file.m4f will be replaced with file.m4. This helps tracing the macros which are executed only when the files are frozen, typically m4_define. For instance, running:

 
autom4te --melt 1.m4 2.m4f 3.m4 4.m4f input.m4

is roughly equivalent to running:

 
m4 1.m4 2.m4 3.m4 4.m4 input.m4

while

 
autom4te 1.m4 2.m4f 3.m4 4.m4f input.m4

is equivalent to:

 
m4 --reload-state=4.m4f input.m4

`--freeze'
`-f'
Produce a frozen state file. autom4te freezing is stricter than M4's: it must produce no warnings, and no output other than empty lines (a line with whitespace is not empty) and comments (starting with `#'). Please, note that contrary to m4, this options takes no argument:

 
autom4te 1.m4 2.m4 3.m4 --freeze --output=3.m4f

corresponds to

 
m4 1.m4 2.m4 3.m4 --freeze-state=3.m4f

`--mode=octal-mode'
`-m octal-mode'
Set the mode of the non-traces output to octal-mode; by default `0666'.

As another additional feature over m4, autom4te caches its results. GNU M4 is able to produce a regular output and traces at the same time. Traces are heavily used in the GNU Build System: autoheader uses them to build `config.h.in', autoreconf to determine what GNU Build System components are used, automake to "parse" `configure.ac' etc. To save the long runs of m4, traces are cached while performing regular expansion, and conversely. This cache is (actually, the caches are) stored in the directory `autom4te.cache'. It can safely be removed at any moment (especially if for some reason autom4te considers it is trashed).

`--cache=directory'
`-C directory'
Specify the name of the directory where the result should be cached. Passing an empty value disables caching. Be sure to pass a relative path name, as for the time being, global caches are not supported.

`--no-cache'
Don't cache the results.

`--force'
`-f'
If a cache is used, consider it obsolete (but update it anyway).

Because traces are so important to the GNU Build System, autom4te provides high level tracing features as compared to M4, and helps exploiting the cache:

`--trace=macro[:format]'
`-t macro[:format]'
Trace the invocations of macro according to the format. Multiple `--trace' arguments can be used to list several macros. Multiple `--trace' arguments for a single macro are not cumulative; instead, you should just make format as long as needed.

The format is a regular string, with newlines if desired, and several special escape codes. It defaults to `$f:$l:$n:$%'. It can use the following special escapes:

`$$'
The character `$'.

`$f'
The filename from which macro is called.

`$l'
The line number from which macro is called.

`$d'
The depth of the macro call. This is an M4 technical detail that you probably don't want to know about.

`$n'
The name of the macro.

`$num'
The numth argument of the call to macro.

`$@'
`$sep@'
`${separator}@'
All the arguments passed to macro, separated by the character sep or the string separator (`,' by default). Each argument is quoted, i.e., enclosed in a pair of square brackets.

`$*'
`$sep*'
`${separator}*'
As above, but the arguments are not quoted.

`$%'
`$sep%'
`${separator}%'
As above, but the arguments are not quoted, all new line characters in the arguments are smashed, and the default separator is `:'.

The escape `$%' produces single-line trace outputs (unless you put newlines in the `separator'), while `$@' and `$*' do not.

See section 3.4 Using autoconf to Create configure, for examples of trace uses.

`--preselect=macro'
`-p macro'
Cache the traces of macro, but do not enable traces. This is especially important to save CPU cycles in the future. For instance, when invoked, autoconf preselects all the macros that autoheader, automake, autoreconf etc. will trace, so that running m4 is not needed to trace them: the cache suffices. This results in a huge speed-up.

Finally, autom4te introduces the concept of Autom4te libraries. They consists in a powerful yet extremely simple feature: sets of combined command line arguments:

`--language=language'
`-l =language'
Use the language Autom4te library. Current languages include:

M4sugar
create M4sugar output.

M4sh
create M4sh executable shell scripts.

Autotest
create Autotest executable test suites.

Autoconf
create Autoconf executable configure scripts.

`--prepend-include=dir'
`-B dir'
Prepend directory dir to the search path. This is used to include the language-specific files before any third-party macros.

As an example, if Autoconf is installed in its default location, `/usr/local', running `autom4te -l m4sugar foo.m4' is strictly equivalent to running `autom4te --prepend-include /usr/local/share/autoconf m4sugar/m4sugar.m4f --warnings syntax foo.m4'. Recursive expansion applies: running `autom4te -l m4sh foo.m4' is the same as `autom4te --language M4sugar m4sugar/m4sh.m4f foo.m4', i.e., `autom4te --prepend-include /usr/local/share/autoconf m4sugar/m4sugar.m4f m4sugar/m4sh.m4f --mode 777 foo.m4'. The definition of the languages is stored in `autom4te.cfg'.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

This document was generated by Jeff Bailey on December, 24 2002 using texi2html