Node:Karatsuba Multiplication, Next:, Previous:Basecase Multiplication, Up:Multiplication Algorithms


Karatsuba Multiplication

The Karatsuba multiplication algorithm is described in Knuth section 4.3.3 part A, and various other textbooks. A brief description is given here.

The inputs x and y are treated as each split into two parts of equal length (or the most significant part one limb shorter if N is odd). 

 high              low
+----------+----------+
|    x1    |    x0    |
+----------+----------+

+----------+----------+
|    y1    |    y0    |
+----------+----------+

Let b be the power of 2 where the split occurs, ie. if x0 is k limbs (y0 the same) then b=2^(k*mp_bits_per_limb). With that x=x1*b+x0 and y=y1*b+y0, and the following holds, 

x*y = (b^2+b)*x1*y1 - b*(x1-x0)*(y1-y0) + (b+1)*x0*y0

This formula means doing only three multiplies of (N/2)x(N/2) limbs, whereas a basecase multiply of NxN limbs is equivalent to four multiplies of (N/2)x(N/2). The factors (b^2+b) etc represent the positions where the three products must be added. 

 high                              low
+--------+--------+ +--------+--------+
|      x1*y1      | |      x0*y0      |
+--------+--------+ +--------+--------+
          +--------+--------+
      add |      x1*y1      |
          +--------+--------+
          +--------+--------+
      add |      x0*y0      |
          +--------+--------+
          +--------+--------+
      sub | (x1-x0)*(y1-y0) |
          +--------+--------+

The term (x1-x0)*(y1-y0) is best calculated as an absolute value, and the sign used to choose to add or subtract. Notice the sum high(x0*y0)+low(x1*y1) occurs twice, so it's possible to do 5*k limb additions, rather than 6*k, but in GMP extra function call overheads outweigh the saving.

Squaring is similar to multiplying, but with x=y the formula reduces to an equivalent with three squares, 

x^2 = (b^2+b)*x1^2 - b*(x1-x0)^2 + (b+1)*x0^2

The final result is accumulated from those three squares the same way as for the three multiplies above. The middle term (x1-x0)^2 is now always positive.

A similar formula for both multiplying and squaring can be constructed with a middle term (x1+x0)*(y1+y0). But those sums can exceed k limbs, leading to more carry handling and additions than the form above.

Karatsuba multiplication is asymptotically an O(N^1.585) algorithm, the exponent being log(3)/log(2), representing 3 multiplies each 1/2 the size of the inputs. This is a big improvement over the basecase multiply at O(N^2) and the advantage soon overcomes the extra additions Karatsuba performs.

MUL_KARATSUBA_THRESHOLD can be as little as 10 limbs. The SQR threshold is usually about twice the MUL. The basecase algorithm will take a time of the form M(N) = a*N^2 + b*N + c and the Karatsuba algorithm K(N) = 3*M(N/2) + d*N + e. Clearly per-crossproduct speedups in the basecase code reduce a and decrease the threshold, but linear style speedups reducing b will actually increase the threshold. The latter can be seen for instance when adding an optimized mpn_sqr_diagonal to mpn_sqr_basecase. Of course all speedups reduce total time, and in that sense the algorithm thresholds are merely of academic interest.