Go to the first, previous, next, last section, table of contents.


Invoking the shar program

The format of the shar command is one of:

shar [ option ] ... file ...
shar -S [ option ] ...

In the first form, the file list is given as command arguments. In the second form, the file list is read from standard input. The resulting archive is sent to standard output unless the -o option is given.

Options can be given in any order. Some options depend on each other: the -o option is required if the -l or -L option is used. The -n option is required if the -a option is used. Also see -V below.

Some options are special purpose:

--help
Print a help summary on standard output, then immediately exits.
--version
Print the version number of the program on standard output, then immediately exits.
-q
--quiet
Verbose off at shar time. Messages are usually issued on standard error to let the user follow the progress, while making the archives. This option inhibits these messages.

Selecting files

-p
--intermix-type
Allow positional parameter options. The options -M, -B, -T, -z and -Z may be embedded, and files to the right of the option will be processed in the specified mode. Without the -p option, embedded options would be interpreted as file names. See section Selecting how files are stocked for more information on these options.
-S
--stdin-file-list
Read list of files to be packed from the standard input rather than from the command line. Input must be one file name per line. This switch is especially useful when the command line will not hold the list of files to be packed. For example:
find . -type f -print | shar -S -o /tmp/big.shar
If -p is specified on the command line, then the options -M, -B, -T, -z and -Z may be included in the standard input (on a line separate from file names). The maximum number of lines of standard input, file names and options, may not exceed 1024.

Splitting output

-o prefix
--output-prefix=prefix
Save the archive to files `prefix.01' through `prefix.nnn' instead of standard output. This option must be used when the -l or the -L switches are used. When prefix contains any `%' character, prefix is then interpreted as a sprintf format, which should be able to display a single decimal number. When prefix does not contain such a `%' character, the string `.%02d' is internally appended.
-l size
--whole-size-limit=size
Limit the output file size to size times 1024 bytes but don't split input files. This allows the recipient of the shell archives to unpack them in any order.
-L size
--split-size-limit=size
Limit output file size to size times 1024 bytes and split files if necessary. The archives created with this option must be unpacked in the correct order. If the recipient of the shell archives wants to put all of them in a single folder, she shall save them in the correct order for unshar, used with option -e, to unpack them all at once. See section Invoking the unshar program. For people used to saving all the shell archives into a single mail folder, care must be taken to save them in the appropriate order. For those having the appropriate tools (like Masanobu Umeda's rmailsort package for GNU Emacs), shell archives can be saved in any order, then sorted by increasing date (or send time) before massive unpacking.

Controlling the shar headers

-n name
--archive-name=name
Name of archive to be included in the header of the shar files. Also see the -a switch further down.
-s address
--submitter=address
The -s option allows for overriding the email address for the submitter, for when the default is not appropriate. The automatically determined address looks like `username@hostname'.
-a
--net-headers
Allows automatic generation of headers:
Submitted-by: address
Archive-name: name/partnn
The name must be given with the -n switch. If name includes a `/', then `/part' isn't used. Thus `-n xyzzy' produces:
xyzzy/part01
xyzzy/part02
while `-n xyzzy/patch' produces:
xyzzy/patch01
xyzzy/patch02
and `-n xyzzy/patch01.' produces:
xyzzy/patch01.01
xyzzy/patch01.02
-c
--cut-mark
Start the shar with a cut line. A line saying `Cut here' is placed at the start of each output file.

Selecting how files are stocked

-T
--text-files
Treat all files as text, regardless of their contents.
-B
--uuencode
Treat all files as binary, use uuencode prior to packing. This increases the size of the archive. The recipient must have uudecode in order to unpack.
Use of uuencode is not appreciated by many on the net, because
people like to readily see, by mere inspection of a shell archive,
what it is about.
-M
--mixed-uuencode
Mixed mode. Automatically determine if the files are text or binary and archive correctly. Files found to be binary are uuencoded prior to packing. This option is selected by default. For a file is considered to be a text file, instead of a binary file, all the following should be true simultaneously:
  1. The file does not contain any ASCII control character besides BS (backspace), HT (horizontal tab), LF (new line) or FF (form feed).
  2. The file does not contains a DEL (delete).
  3. The file contains no character with its eighth-bit set.
  4. The file, unless totally empty, terminates with a LF (newline).
  5. No line in the file contains more than 200 characters. For counting purpose, lines are separated by a LF (newline).
-z
--gzip
Use gzip and uuencode on all files prior to packing. The recipient must have uudecode and gzip (used with -d) in order to unpack. Usage of -z in net shars will cause you to be flamed off the earth.
-g level
--level-for-gzip=level
When doing compression, use -level as a parameter to gzip. The -g option turns on the -z option by default. The default value is 9, that is, maximum compression.
-Z
--compress
Use compress and uuencode on all files prior to packing. The recipient must have uudecode and compress (used with -d) in order to unpack. Option -C is a synonymous for -Z, but is deprecated. Usage of -Z in net shars will cause you to be flamed off the earth.
-b bits
--bits-per-code=bits
When doing compression, use -bx as a parameter to compress. The -B option turns on the -Z option by default. The default value is 12, foreseeing the memory limitations of some compress programs on smallish systems, at unshar time.

Protecting against transmission errors

Transmission of shell archives is not always free of errors. So one should make consistency checks on the receiving site. A very simple (and unreliable) method is running the UNIX wc tool on the output file. This can report the number of characters in the file.

As one can guess this does not catch all errors. Especially changing of a character value does not change the computed check sum. To achieve this goal better method were invented and standardized. One very strong is MD5 (MD = message digests). This is standardized in RFC 1321. The produced shell scripts do not force the md5sum program to be installed on the system. This is necessary because it is not yet part of every UNIX. The program is however not necessary for producing the shell archive.

-w
--no-character-count
Do not check with `wc -c' after unpack. The default is to check.
-D
--no-md5-digest
Do not check with `md5sum' after unpack. The default is to check.
-F
--force-prefix
Prepend the prefix character to every line even if not required. This option may slightly increase the size of the archive, especially if -B or -Z is used. Normally, the prefix character is `X'. If the parameter to the -d option starts with `X', then the prefix character becomes `Y'.
-d string
--here-delimiter=string
Use string to delimit the files in the shar instead of `SHAR_EOF'. This is for those who want to personalize their shar files.

Producing different kinds of shars

-V
--vanilla-operation
This option produces vanilla shars which rely only upon the existence of echo, test and sed in the unpacking environment. The -V disables options offensive to the network cop (or brown shirt). It also changes the default from mixed mode -M to text mode -T. Warnings are produced if option -B, -z, -Z, -p or -M is specified (any of which does or might require uudecode, gzip or compress in the unpacking environment).
-P
--no-piping
In the shar file, use a temporary file to hold the file to uudecode, instead of using pipes. This option is mandatory when you know the unpacking uudecode is unwilling to merely read its standard input. Richard Marks wrote what is certainly the most (in)famous of these, for MSDOS :-). (Here is a side note from the maintainer. Why isnt't this option the default? In the past history of shar, it was decided that piping was better, surely because it is less demanding on disk space, and people seem to be happy with this. Besides, I think that the uudecode from Richard Marks, on MSDOS, is wrong in refusing to handle stdin. So far that I remember, he has the strong opinion that a program without any parameters should give its --help output. Besides that, should I say, his uuencode and uudecode programs are full-featured, one of the most complete set I ever saw. But Richard will not release his sources, he wants to stay in control.)
-x
--no-check-existing
Overwrite existing files without checking. If neither -x nor -X is specified, when unpacking itself, the shell archive will check for and not overwrite existing files (unless -c is passed as a parameter to the script when unpacking).
-X
--query-user
Interactively overwrite existing files. Use of -X produces shars which will cause problems with some unshar-style procedures, particularily when used together with vanilla mode (-V). Use this feature mainly for archives to be passed among agreeable parties. Certainly, -X is not for shell archives which are to be submitted to Usenet or other public networks. The problem is that unshar programs or procedures often feed `/bin/sh' from its standard input, thus putting `/bin/sh' and the shell archive script in competition for input lines. As an attempt to alleviate this problem, shar will try to detect if `/dev/tty' exists at the receiving site and will use it to read user replies. But this does not work in all cases, it may happen that the receiving user will have to avoid using unshar programs or procedures, and call /bin/sh directly. In vanilla mode, using `/dev/tty' is not even attempted.
-m
--no-timestamp
Avoid generating touch commands to restore the file modification dates when unpacking files from the archive. When the timestamp relationship is not preserved, some files like `configure' or `*.info' may be uselessly remade after unpacking. This is why, when this option is not used, a special effort is made to restore timestamps,
-Q
--quiet-unshar
Verbose off at unshar time. Disables the inclusion of comments to be output when the archive is unpacked.
-f
--basename
Use only the last file name component of each input file name, ignoring any prefix directories. This is sometimes useful when building a shar from several directories, or another directory. If a directory name is passed to shar, the substructure of that directory will be restored whether -f is specified or not.


Go to the first, previous, next, last section, table of contents.